开云体育

开云体育

I can't find my remote control and was wondering if anyone has one needing a new home in south Texas.? Cash or trade available.

Best 73,

Gary Harmon
k5jwkgary@...

Hi fellow operators?
I am looking for a power switch and? button cap for my 998. I have pretty much exhausted thingybay and amazon, Aliexpress etc are a no go and I cant find a UK stockist that does that size of button cap.
The 6 pin switch I can source so can anyone point me to either a complete switch/button cap assy or just the button cap please.
Failing that has anyone stripped one for spares?
Regards
Garry.

Please ignore this post. It's a classic scam.

MFJ 30 m transceiver, Antenna Tuners,
Keyer, and more For Sale:

.

MFJ 9030, QRP 30 m CW Transceiver:

The MFJ-9030 is a 5 watt, 30 m CW transceiver
that is very light and compact.

It has a sensitive super-het receiver that has an
IF filter for great CW reception. The VFO is
smooth and stable; RIT is included.

Built in speaker; Motorola power amplifier
transistor delivers full QRP output and
tolerates opens and accidental shorts
without damage.

It uses little power - only 50 mA average on
receive and 1.2 amp peak on transmit.
Perfect for battery operation.

This one works as it should.
Cosmetically, it is like new, with no scratches
or defects. Buy it with paper work for $220

.

All of these are MFJ HF Antenna Tuners.
All work 100% like they should, and
cosmetically look like new, with no scratches.
All include instruction manuals.

MFJ 9201 "QRPocket Tuner"
12 position inductor switch.
BNC connectors in and out on front panel.
Great to use with MFJs single band QRP rigs.
Easy to carry in your back pack.
In its original box for $60.

MFJ 901 B
Black enclosure.
160 thru 10 m, at 200 Watts according to MFJ.
They say it's designed to match virtually any
transmitter to almost any antenna.
SO-239 connectors in and out on back panel.
Includes built in 4:1 balun. $100

MFJ 16010 ST
Same electrically as MFJ 901 B, but in a nice
deluxe woodgrain TenTec enclosure. $90

.

MFJ-401 C Electronic Iambic Keyer:

The MFJ-401C keyer provides iambic key operation
and dot-and-dash memory to make sending easier.
It keys both positive and negative rigs.

You get everything you need to send great CW from
this MFJ Curtis Keyer, including easy access
front panel controls, all keyer modes, dot-dash
memories, jam-proof spacing, weight control,
sidetone, built-in speaker and more. Speed,
volume controls, semi-auto and on/off switches
are all on the front panel.

It is the same as MFJ-407 except weight and tone
controls are adjusted internally and it doesn’t
have a tune switch. Use 9 volt battery or 110 VAC
with MFJ-1312D.

This one works as it should.
Cosmetically, it looks perfect, with no scratches
or defects.

Buy it with manual for $60

.

MFJ-1313 Wall Wart Power Supply
12 V DC at 100 ma, 2.8 mm plug; $14

.


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400





.

That's so tiny and blurry, I can't read most of it.

Perhaps if you upload it to Photos?

--
Steven Greenfield AE7HD

Thanks @Daniel,?
Again, forgive my ignorance.?
Do I set the pins up as follows.??
Mic Jumper: Yaesu 8 Pin Bottom of Page 9
Radio Jumper: Yaesu Bottom of page 8.

https://static.dxengineering.com/global/images/instructions/mfj-1263_lp.pdf

Hello,?
I don't know if I'm being stupid or I just cant see it in the manual.?
I have a Yaesu FT-847 and an FT 101D
I use a mix of Microphones, But want to tidy the desk and only use two so I bought the MFJ-1263 Microphone/Radio switch.?
(Microphones are Yaesu M100, Heil Pro 7 and Heil HM12 and MH31 on the Ft-847)
I can't seem to find any information on the pin settings for Yaesu to Yaesu in the manual.?
Like I stated, I'm probably being stupid and am missing it completely.?
Please put me out of my misery.??

MFJ 30 m transceiver, Antenna Tuners,
Keyer, and more For Sale:

.

MFJ 9030, QRP 30 m CW Transceiver:

The MFJ-9030 is a 5 watt, 30 m CW transceiver
that is very light and compact.

It has a sensitive super-het receiver that has an
IF filter for great CW reception. The VFO is
smooth and stable; RIT is included.

Built in speaker; Motorola power amplifier
transistor delivers full QRP output and
tolerates opens and accidental shorts
without damage.

It uses little power - only 50 mA average on
receive and 1.2 amp peak on transmit.
Perfect for battery operation.

This one works as it should.
Cosmetically, it is like new, with no scratches
or defects. Buy it with paper work for $220

.

All of these are MFJ HF Antenna Tuners.
All work 100% like they should, and
cosmetically look like new, with no scratches.
All include instruction manuals.

MFJ 9201 "QRPocket Tuner"
12 position inductor switch.
BNC connectors in and out on front panel.
Great to use with MFJs single band QRP rigs.
Easy to carry in your back pack.
In its original box for $60.

MFJ 901 B
Black enclosure.
160 thru 10 m, at 200 Watts according to MFJ.
They say it's designed to match virtually any
transmitter to almost any antenna.
SO-239 connectors in and out on back panel.
Includes built in 4:1 balun. $100

MFJ 16010 ST
Same electrically as MFJ 901 B, but in a nice
deluxe woodgrain TenTec enclosure. $90

.

MFJ-401 C Electronic Iambic Keyer:

The MFJ-401C keyer provides iambic key operation
and dot-and-dash memory to make sending easier.
It keys both positive and negative rigs.

You get everything you need to send great CW from
this MFJ Curtis Keyer, including easy access
front panel controls, all keyer modes, dot-dash
memories, jam-proof spacing, weight control,
sidetone, built-in speaker and more. Speed,
volume controls, semi-auto and on/off switches
are all on the front panel.

It is the same as MFJ-407 except weight and tone
controls are adjusted internally and it doesn’t
have a tune switch. Use 9 volt battery or 110 VAC
with MFJ-1312D.

This one works as it should.
Cosmetically, it looks perfect, with no scratches
or defects.

Buy it with manual for $80

.

Retech RSW-2 Coax Switch:

The Retech RSW-2 coax switch is a 2 position
switch, on a heavy die cast base, that features
strip line construction. This means it works
well up into the GHz range. It will handle
full legal power. All connections are teflon
SO-239s, ready to take your PL-259.

It is very similar to the MFJ 1702 or Diawa
CS-201 or Diamond CX-210A .

This one works as it should, and looks like new,
with no scratches or defects.
Buy it for only $35

.

MFJ-1313 Wall Wart Power Supply
12 V DC at 100 ma, 2.8 mm plug; $14

.


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@... or W8EK@...
Voice Phone (352) 732-8400





.

Sorry Daniel, I do not know the answer to your question, however, one can assume that the B version is a later version, and as such, may be better (or why make a B version). So, my inclination would be to check it out using the schematic in the manual and if necessary modify to make it a B version.?
Some of the MFJ equipment the only differences between versions are in cosmetics, some better performance due to tighter controls.
It is of course possible that the supply of proms dried up and they changed proms, so that would be the first place to look, you are going to have to compare the schematic and sort of reverse engineer your device.
What I have done in the past in a similar situation is to make a copy of the schematic, and as I trace the actual paths on the device, I use a highlighter on the schematic indicating that the trace or component is physically same. It is time consuming and somewhat arduous, but necessary to confirm they are the same.
Hope that helps

--
Jeff - NZ2S

@ Jeff - NZ2S

Hello Jeff

Thanks but this schematic is for the MFJ-434B. Is it the same like the MFJ-434?

Daniel
HB9DDS

It is in the back of the manual attached

--
Jeff - NZ2S

Search: Schematic MFJ-434

Daniel
HB9DDS

Yes, I have been in touch with MFJ. I emailed them twice with no response, and was able to get to them via phone after several tries. The guy in tech support said he would look for one and email it to me, but as yet I have received nothing. When I spoke to the receptionist, she said that they were all at the Orlando Hamfest. I'll keep waiting, but in the meantime I thought I would try other sources.
Thanks for your response.
--
73
Clif
K5LIF

Clif . . .

On Tue, 14 Feb 2023 16:58:36 -0800, cdschlicher@... wrote:

The only schematic I can find is the downloaded pdf from MFJ or the various manual download sites. All of them are basically unreadable even when I max out the print quality on my printer. A clean scan of the printed manual would be great.

Have you contacted MFJ? They may be able to send you a manual, or may have a
higher-res scan of one you can download.


Donald KX8K





----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP

The manual can be from any of the VEC-13xx series, as they all use the same manual.
Thanks.
--
73
Clif
K5LIF