开云体育

Rotational Play in GM811G RA?

Jim Waters #66716 How much rotational play should be in my GM811G?? I fixed my DEC Wiggle and am wondering about my RA.? I have a GM811G and the RA does not have the spring loaded worm mod.? Thx Jim W Phoenix, AZ
Brian Valente Member Profile All Messages By This Member #66717 Hi Jim Any RA backlash is irrelevant, as it only moves in one direction and never reverses. Brian toggle quoted message Show quoted text On Wed, Jun 10, 2020 at 6:57 PM Jim Waters <jimwaters@...> wrote: How much rotational play should be in my GM811G?? I fixed my DEC Wiggle and am wondering about my RA.? I have a GM811G and the RA does not have the spring loaded worm mod.? Thx Jim W Phoenix, AZ -- Brian? Brian Valente portfolio
Jim Waters #66718 Understood.? But should there be any side to side play?
Sonny Edmonds #66727 How can side play be there unless the clutch is released? -- SonnyE (I suggest viewed in full screen)
Brian Valente Member Profile All Messages By This Member #66728 there may be a small amount If you are grabbing the counterweight shaft and rotating it, keep in mind you have quite an angular lever there, so it may seem like a lot more at the end of the shaft Brian
Deric Caselli All Messages By This Member #66743 开云体育 Okay I had the same perceived issue with this myself Brian, is right about this movement everything is OK. If you remove the DEC section then try to rotate the RA plate by hand if you cant it's good to go. It does seem odd but the RA is constantly moving and the worm will be engaged. HAPPY SKIES Deric P.S. Brian, you will be happy to know I have had no further troubles. LOL....? Sent from my Galaxy Tab A toggle quoted message Show quoted text -------- Original message -------- From: Brian Valente <bvalente@...> Date: 6/11/20 9:37 AM (GMT-06:00) To: [email protected] Subject: Re: [Losmandy_users_io] Rotational Play in GM811G RA? there may be a small amount If you are grabbing the counterweight shaft and rotating it, keep in mind you have quite an angular lever there, so it may seem like a lot more at the end of the shaft Brian

Previous Topic Next Topic