开云体育

Hi Arun, Thanks for re-posting the log. I see a strange error, and can't quite explain what I see. it appears that Gemini was in some bad state during the first part of the log: while there were

Sorry, Paul. Yes, I deleted it. But here it is attached again.

Don't see the attached error log, perhaps it was deleted? In any case, timeout errors in UDP log are not normal, these indicate lost or unprocessed requests which is a serious network error. While the

Sonny, The "big arrow" will be grayed out if you are looping images on the imaging tab. One thing to check. It's got me quite a few times. Overall, I find N.I.N.A. a great piece of free software.

Yes I see the disconnects. it seems there was some no ack beforehand i don't know if this is normal UDP behavior or not, i'll see if Paul K can chime in here You might try a different ethernet cable

Brian, Attached is the debug log. There are several ethernet connection errors, for example, starting at?23:00:07.815. In each case, it reconnected. It is curious. I've never had it when I connected

Dealing with June Gloom here. It's hot, it's cold, it's foggy, it's misting, the apps are crap. But there is a couple of thoughts that don't help: If you don't like the weather, wait 15 minutes and

Well, nope, never had something specifically a communications error. I've seen a lot of things that were indescribably odd. And things that would break the will of strong men and make them walk away

Hi Arun ah got it. yes there's a debug log it generates. under configure telescope option, you can set the debug log option. i would put it to 5. very detailed I believe it's saved under My

Colorado is in its usual spring/early summer cycle...? Sunny mornings then increasing clouds + thunder storms in the PM.? Clearing again after mid-night. Dave... Franktown, CO

Brian, I meant the ASCOM server, the one that’s minimized I to the task bar. Does it have an error log? If so, I can try to find it and share.

Hi Arun I'm not sure what is the "gemini server"? There's really no good way to diagnose this without seeing that conditions underwhich this happened, the specific error message text, and looking at

Last night, when I was imaging, I was using the method outlined in my previous thread - connecting both the imaging computer and the mount though a router. On occasion, the Gemini server would

Hi Terry, Going that route of replacing the EPROM, here are some notes and advise: You will not need to pull out the battery, just leave it in place. That will hold the SRAM data of location Latitude

You guys must live in my neighborhood!? Exact same condx here!? Been solar imaging - not that the sun has cooperated much - to get my astronomy fix. LOL! John

Many thanks to all [Michael, Chip, SonnyE, Brendan and Chyck] who commented on and offered advice on my resurrected G11. I'll be following up on upgrading the firmware EPROM with David P here in the

Hi Erik great to hear! thanks for the update, looking forward to hearing more of your adventures Brian [email protected]> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com

I hung out and then the sky cleared, although still very humid. After a simple two-star align, I sent my scope to M57 and there it was. I've been looking at that little ring for the last 56 years. In

That's just bad luck... because I usually find the full-moon is the only time it's clear. My working hypothesis is that the full-moon burns off the clouds. ;-) Clear Skies, Tim

So I started hauling everything out at twilight and now the clouds and insects have descended. I have still not had a chance to operate/test my new 811. My poor wife keeps asking me how are things