开云体育

Yes, that was that. I tightened them and it is now solid. Thank you. ________________________________ Sent: Saturday, November 28, 2020 6:24 PM To: [email protected] <[email protected]>

Thanks, Brian. We should have clear skies tomorrow night, so I can give it a go. Matt

Hello David, Ian posted this problem on SGL as I'd had a similar issue with my Gemini1 some years ago I posted a reply. After having the issue for a period of time it dawned on me that it was moisture

Yeah but this time setting up indoors there is no load. ?Incorrect balance load can cause huge headaches. Balance is everything. Especially with the older motors. ? Experienced users balance it one

When in doubt, do a cold start. and if that's in doubt, do a reset to HGM defaults Brian

Dunno where I’d get the switch membrane … a replacement HC is $270 I’d like to get a case back as his is broken do you know the make of the case? D. Sent: 29 November 2020 00:31 To:

Did you adjust the worm clearance lately – if so, and you did it inside the house, then when the mount cools down it will bind. You need to adjust when cold or allow a degree of “slop” when warm

Brian, Thanks for the link. I haven't done a cold start since putting in the new battery. Matt

It's worth using the tool at gemini-2 to confirm your settings (in a format you can use for Gemini II) https://gemini-2.com/lat_long_from_address.html Can you elaborate on what's happening - you

No sure what to say.....is there loose screws?? Under the cap? -- Brendan

Magnus, It is roughly an hour. I haven't tried to get a more accurate estimate, but I think that's pretty close. That correlation with DST is why I looked at the time in the handset :( Matt

I’d say clearly there was an issue. ?Maybe swap the HC front membrane and top case. Not much else to say. Apart from try recreate the OPs user conditions. I still feel it’s moisture! -- Brendan

Yes. It’s not idea; but yes you can. wrote: Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Hi! 1 hour sounds like something to do with summer time. Precisely or roughly one hour? Magnus Den 2020-11-28 kl. 23:23, skrev matt harmston:

Hi All. I recently swapped my battery, following the guidance from the group. All appears well...except, something puzzles me. The last couple of warm restarts put my first goto off the mark...by

Hi all, could not get the mount to track tonight, checked time/Date/location, polar aligned, tried all tracking modes, normal guide control was fine.. was like this for a few hours then I got the

I had no problem autoguiding with a ASI120 MC as the autoguide camera. Best, Michael wrote:

Can you guide with a OSC camera?? I am talking to a beginner who can but an ASI 120MC and I want to know if I can tell him "eventually you can use it as a guider" while, in the meantime he can start

So.. Almost exactly one hour until the event and I have been guiding for 3 hours. Total RMS of 0.67 arcseconds.. Is that "Horrible". "Sort of OK".. "OK".. "Good".. "Freaking Fantastic".. or what??

It’s now been on overnight (in terrestrial mode so it doesn’t yell at me for hitting limits). No problems whatsoever. I’m with you on returning items with NFF. D. Sent: 27 November 2020 22:34