开云体育

Hey Frank, The ONLY reason I mentioned the G11G was because of the spring loaded worm blocks on BOTH the RA and Dec vs the G11T only has the Dec spring loaded.? Theoretically less maintenance,

Titan Mount: When slewing to the first star, for alignment, when the mount stops moving the star also stops moving...as expected. The next few stars always move after the mount stops moving; they tend

Hi Joe, Thank you for your information! The G11T will be permanantly mounted on the pier. I live in B-4 so no reason to take it anywhere else. Are you saying that the G11G is better only because it is

Frank, Question #2,? The MAL has a 1/2" hole in the center, then about six or eight 5/16 or 3/8" holes around the edge.? You will need it as the mount sits inside and is fastened by screws from the

Hi, I'm new to the group and getting ready to buy a new G11T and have a few questions; 1) Wanted to confirm that the included Gemini 2 is shipping with the L6 or is it still an add on? 2) It will be

Always wanted to get my mount to have partial through the mount cabling. Rebuilt my power box and got the cables down to 1 silicone power cable and a thin flexible Ethernet cable. After some thought,

Yes, Spring Loaded Worm Gears.? Running PHD2 through SGP.

What's the mount and do you have Spring Loaded Worms? ------------------------ Jim W Phoenix, AZ. USA Losmandy G11G w/ L6, NINA 3.0 / ASTAP, ASI2600MC Pro, Sky-Watcher Scopes, Canon L Lenses.

Spent a lot of time settling to get three hours of data on M106.?I didn't noticed until I was waiting for the medrian flip.? It would appear to guide will then go beyond about 2 pixels/arc-sec and

Cheers Dan (and thanks Paul). ?Good to get feedback -- Brendan

It's fixed.? Thanks so much, guys.? I can't understand how I could have gone so many years without this happening before. I think what happened was I had touched the screen at bootup when it was

Thanks so much for your responses.? When using the GFU, I did see an error message that micro SD card was not located. Just so I've got this stuff straight in my head.... you guys are saying there's

To add to what Bren suggested, another thing that commonly happens with HC's is that the micro SD card comes loose in its holder and can make intermittent contact. While you have the HC opened, make

Dan this is a known issue ( https://gemini-2.com/faqGII.html#Q19 ) when dirt or debris or pressure is upon the touchscreen bezel when powered up ? Causes HC to cycle languages and other odd things

I got my Losmandy Titan in 2015, running Gemini 2.? The hand controller went crazy on boot up this evening when I turned the mount on..... it was going to other languages..... German, French,

Philip, On the HC you reset the active time zone in the MENU->SYSTEM->SITE panel.? Edit the Time Zone Field.? This adjusts the date/time display but not the G2 internal clock keeping UTC. If instead

Opened the HC, just in case some debris was around the bezel/gasket and did a HC “touch the screen” calibration at startup. All is working normally now! ?Screwed the HC back together and we are

This is what I did to avoid any confusion.

You don't have to change the settings at all if you don't want. I keep my Gemini on UTC all the time.?? You can keep it on your local winter time zone if you wish. If you set your clock an hour

I'm in Belgium, so the timezone is +1. Yesterday we switched to Daylight Saving Time, so +1 hour. How do I change the settings? Timezone +1 and the internal clock one hour later or do I also switch to