开云体育

Regarding the polar alignment, as a stopgap you could do a drift alignment.? You can do it visually, or use PHD2. Bob

I also get an error with WIN10 when using the Polemaster app, where the refresh of the image lags in the 10s of seconds, which equals not usable for PA. I have found that if I run an video in the

Hemant, Please post a pcture so we so we can see what you have. There are at least three different arrangements, as chip identified in his post. Peter

Good to hear on the progress Bret [email protected]> wrote: -- Brian Brian Valente astro portfolio https://www.brianvalentephotography.com/astrophotography/ portfolio brianvalentephotography.com

Hi Folks, Happy to report that I have Gemini working on my home router with DHCP. ? The problem was me ... while connecting in the cable for Gemini, I knocked a different cable loose ... I noticed

The 311K encoders are pretty good when used with a Nexus DSC. You cannot move the mount by hand fast enough to over run the Nexus DSC, I tried it clutches fully loos with an epmty saddle on the GM8G,

I thought INA was a bearing comapny in Germany? They make great bearings IME. -- Chip Louie Chief Daydreamer Imagination Hardware Astropheric Weather Forecast - South Pasadena, CA Astrospheric

Hermant, If you have a gen I OPW where the gearbox attaches directly to a plate fastened to the machined OPW you are going to have to remove the entire assembly as a unit. This is one of the major

Hi Bob, The teardown, cleaning, and re-lubrication is easy to do. You'd need a few common chemicals (maybe degreaser from local auto parts store). Anyways, its easy to do. The needle bearings have

Daniel, As much as I like the Losmandy Gemini 2 mini on the G11G and GM8G as well as the previous Gemini 2 and Gemini 1 GOTO controllers on previous Losmandy mounts I have owned there is nothing?

Hi Bob it may be your screen brightness is set to minimum you can try the following: - use a dark room or somewhere where you can see the screen enough to navigate - from the home screen (diamonds) go

Bob Hancey here, have received some posting for rehab work. May well be the path to repair, but working for success at this point, but the mount may require more than my skills i.e., professional/

Hello, Bob Hancey, here, well the rehab of G11 for SVAS continues (previous topic), have managed to get power to unit. The newest problem, the control (handheld) lights up, but the screen is so dim as

Then Gemini is working, and it's a problem with your network configuration. Perhaps your mesh network or WiFi adapter does not allow Gemini to see the DHCP server from where it is. Try plugging in

I submitted a support ticket.

Yes, a?direct Ethernet connection works (see earlier post).?DHCP does not. ?This is new mount/controller so my?expectation is that it should be fully functional.

You can connect the Gemini directly to any computer that has an Ethernet port.? The instructions are on gemini-2.com.? That is how I do it, with no router.

Brett That was just a suggestion, not Please understand, we can't diagnose and fix something we aren't in front of. We can only suggest things to try without being right there. We have literally

INA is a Chinese firm. Seems to be in the digital measurement space. How do you read, 2 x encoders (311,296 steps)? I'd sure like to read the "installation instruction booklet" before I laid out the

Er, this is a brand new mount.??I believe there’s sufficient evidence that I am using the Gemini correctly and?something is wrong with Gemini unit.?Ive already tried multiple cables, multiple