开云体育

Just testing with RA and DEC control turned off in the guider. Running with multiple stars. And to be sure that OnStep has no secret cross talk, disconnected the DEC cable.? After reading about the

There's probably not very much info in the logs. Since the mount started to act up in Metaguide, I stopped that software and started up PHD2. I did a calibration run where I was pointing and not near

Jim, My guess #1: Your PHD2 is using an existing calibration and it's the wrong calibration for that part of the sky. Maybe you did a meridian flip....? Do this: At the top PHD2 menu under tools

i don't know. i don't know what "RA is taking off" means yes some PHD logs would help -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Brian, it's not just in one program though. It does the same thing in Metaguide, which is my main guiding software. I went out again and checked and it's RA that's taking off. I'm taking 30 subs now

Hi Jim that's not a lot to go on - It would be better if you uploaded guidelog to look my wild guess would be you have reverse dec enabled in PHD? when it shouldn't be -- Brian Brian Valente portfolio

if you want to upload some guidelogs i'm happy to look at them -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

All of a sudden my G11 has decided to take off when I activate software guiding. It tracks fine and I get 30 second images with not star trailing but as soon as start guiding in PHD2 or Metaguide the

I want to get to 0.5" RMS total but 1.2 is the closest I got, with the 12".? I'm looking at mechanical problems first.? The DIY spring loaded worms seem to work but I will check again, need to check

I don't believe so (read somewhere to not allow that) but will check again.

Russ Is it possible you have Set Gemini time and location on connect in your Gemini telescope.net application? [email protected]> wrote: Brian Brian Valente portfolio brianvalentephotography.com

Constantly having the same issue when connecting scope to NINA, MAXIM and any other software.? Tonight for example, the G11 HC (physical device) shows my location (LAT/LONG/TIME) correctly.?

haha well i'll say it one more time "this doesn't directly address your question, but i think having a solid foundation is an important first step here" Fixing symptoms with unknown causes is always a

?hmmm well the prior one i showed was pretty much the same, but maybe you didn't see the second image on that post What calibration problems are you having? -- Brian Brian Valente portfolio

Hi Brian, that's not the same graph that you showed earlier.? Never mind though, I am just a disturbance trying to learn how to debug calibration problems.

I made a habit of making large steps for calibration sometime ago, and I honestly can't remember exactly why I did that... I think that PHD was complaining that my steps were too small, so I just

Hi Jeff Are you referring to a reset to default values? from your hand controller main screen MENU->SYSTEM->RESET HGM DEFAULTS then power cycle the Gemini After that I recommend doing a Quick Start

How do you do default setting for anything on Gemini 2. I haven’t found a video that shows that yet. I have looked through the menu and I haven’t seen it. It has to be something obvious I just

Jeff are you imaging or observing? -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

I have not tried those. I was thinking of getting a polemaster. On other mounts, I have used a polar alignment scope and it was usually close enough. I don’t even know if there is such a thing for