开云体育

Russ, When I have have experienced issues like this there are two basic things to try. First replace the coin battery in the Gemini Unit. You're probably in the Northern Hemisphere where it's winter

Russ, Assuming you are cold starting in the CWD position you may have a time issue between local time and UT. Paul

Russ, Is you mount in the telescope CWD position when you do a cold start? Paul

I know this sounds crazy, but check that you do not have the RA and Dec cables switched. ?I have done this. ?More than once. Check your time zone. ?I found that setting the time zone to 00, and the

Thanks Brian.? I have a cheat sheet created identifying exactly those checks and I verified a number of time all setting are correct (via handheld).? Going back outside again and starting all

Hi Russ Sorry to hear this, that sounds super frustrating It's definitely sounding like a setting somewhere, so here are some ideas: First, I recommend using the hand controller to enter your

Confused here.? After entering Site Lat, Long and Time, I would expect any mount to at least slew to an area of the sky 'near' the target first (I did complete an excellent polar alignment last

Have you polar aligned it and built a pointing model as yet? And cold starting it wipes the slate clean. I had weird problems like yours when I got started with the mount. But the Gemini does need to

I am so damn furious with my mount right now!!? I had to do a cold restart and verified my site info; Lat, Long and time.? Rebooted Mount and verify settings are saved and correct. 1)? I tell the

You want the mount ON and tracking at sidereal otherwise your stars will blur and/or lose their position and your Polar alignment will suffer Brian [email protected]> wrote: -- Brian Brian Valente

I used SharpCap Polar Alignment tool last night for the first time and my PA down to like 10 seconds showing Excellent result.? Today, I looked at somemore YouTube videos and thought I heard someone

Michael Your alternative approach using Stellarium in combination with the Ascom Gemini.net applet to select Bright Stars to align/synch your G11/G-1 on is something I am very interested in but have

great detail! i'll have to check this out more closely wrote: -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

This is around an area passing close to the zenith here about half way between orion and the southern cross. It's not too far from Canopus. There's a lot of very faint stuff in there. More often than

You know this is a funny issue. Years ago when I got the PoleMaster there were issues with the drivers. It was related to power saving features of the PC but a workaround I found that worked was to

Ken Yes! It worked. There's a little action button that you have to select to display the html list and its default is a list that you can't download in Android. Unless you know to put in ** and stl

Just jumping back into this post.? I want to thank everybody for replying and Brian for posting his HIP database.? Thanks everybody...!

it Polar Alignment tool, adjust my PA to obtain excellent results and it only took a few minutes. sharpcap is a great tool for polar alignment. if that is what you intended to do re: your previous

Thanks for the info.? I was able to get a break in the clouds tonight and using SharpCap and it Polar Alignment tool, adjust my PA to obtain excellent results and it only took a few minutes.? Will

No problem. We, as a group, are at the limit of allocated storage space (1GB). This means that as new files are posted, older ones will be deleted. I’ll remove the MAPUG file, as I assume it’s