开云体育

if you are plate solving you should pick NINA to Telescope, assuming that's an option

Here's what I do. * Turn on and set Gemini-2 Lat/Long and Time. * Run PoleMaster and Polar Align. * Model the mount.? I usually pick 2 stars in the West and 2 in the South.? Pine trees are in the

What is the process you are using for goto/centering? i was surprised to see using the hand controller in there, so maybe i"m not understanding how you're going about it i can try to replicate here.

Thanks Paul and Brian for jumping in.

Brian - I am guessing the 30 arc-seconds.? It could be more.? When I first do a GoTo using the HC and running ASTAP there's no issues.? If the target is out of view ASTAP will plate solve and

ah I think i understand now what you're saying so if the result of centering is off. somewhere there is a setting that isn't correct. Something that small could be J2000 is set somewhere it shouldn't

My modeling could be better but I don't see how that would cause issues with ASTAP plate-solving and incorrectly recentering the scope.? ASTAP successfully completes the plate solving according to

Hi Jim 30 arcseconds? That is quite small Are you able to solve and center to within your tolerance? My centering routines for SGP are larger than what you spec'd around 50" usually if you are doing a

Jim, ASCOM driver and Gemini don't change precession settings after doing a meridian flip. Do you have a Gemini model built for both sides of the meridian??If you do a goto after a flip using the

Brian I am having similar or the same issue.? I am using the current release of NINA 1.10 HF2 Beta 06 and have a GM811G.? Goto using the Losmandy HC, the ASTAP plate-solving works as expected but

Hey Sonny you might try the latest 2.6.9dev2 release it includes multi-star guiding which in my experience is 10-15% improvement over regular guiding just check the box :)

Hi John, Yep, it did. I uninstalled my copy of PHD2 I had been using with my SSAG camera. The idea here was to start fairly fresh with a new copy. Then I downloaded a new copy of PHD2 v2.6.9 for

Hi Paul, Thanks for your answer. But perhaps I didn't expose the problem correctly. Without the USB-LAN extender device, I connect the gadgets into the USB ports of the computer: camara 1 in the port

Wow! Using the WayBack Machine to find that one. Thanks. I’m still on the fence as to whether to dig into this. I think I’ll see if the cleaning and re-lubing of the needle bearings fixed my

Bill - I should add that removing the worm involves removing the hex head cap screws that hold the two worm blocks, and that are loosened when adjusting the worm. This will make cleaning and access to

Mearl...it's pretty hard to find. I've been chasing this object for several years and have imaged it atleast 3 times now. The problem is it doesn't show up in a short exposure. Over the years I've

Hi Stu, You inspired me to look for this. Missed not being able to see you at SRSP this year in VA. Hope all are well down by the Beach. Mearl

Here is a link to adjusting a GM8 gear. ?There is no video i am aware of that describes servicing. https://www.youtube.com/watch?v=xDEjUA-Uhts ed

That will be fine John. Tom

Hi Bill it's a tricky recommendation for us. On one hand, we really don't want people to disassemble the worm gear, because if you don't know what you're doing you can easily create more problems than