Re: NINA Controlling Losmandy G11. Coordinate are not the same. Why?
|
Hi Jim
>>>HC ASTAP plate solving is always ~30 arc-seconds off.?
30 arcseconds? That is quite small?
Are you able to solve and center to within your tolerance? My centering routines for SGP are larger than what you spec'd around 50"?
usually if you are doing a meridian flip and it's slightly off, that is cone error.?
if you feel like you want to open a ticket on this send an email to techsupport at losmandy dot com. We'll need the logs for NINA and ASCOM and probably TSX (assuming you have TSX ascom driver in the mix there).?
On Fri, Dec 4, 2020 at 11:30 AM Jim Waters < jimwaters@...> wrote: [Edited Message Follows]
Brian
I am having similar or the same issue.? I am using the current release of NINA 1.10 HF2 Beta 06 and have a GM811G.? Goto using the Losmandy HC, the ASTAP plate-solving works as expected but after I do a meridian flip or change the side of pier using the HC ASTAP plate solving is always ~30 arc-seconds off.? Gemini Expects J2000... is OFF.? I am using the current release of Gemini.NET, ASCOM 6.5 SP1 and TheSkyX Pro.
There's no problems doing the above with a CEM mount with ASCOM, NINA or TheSkyX.
-- Brian?
Brian Valente portfolio
|
