开云体育

Dear Paul, Try this (it has worked for me using Gemini-1...you can try in the daytime to test it): 1. Tell the mount to Park at CWD. This will stop tracking, but not lose your alignment info. Do not

Needs a good cleaning and to have the worms reset to remove some 'wobble', especially in RA. Can some one post links to useful videos or provide PDF's of 'exploded' diagrams of the dis-assembly of

Simple question but I have not been able to find the answer anywhere in the various documents I have read. If I slew or track into a safety limit, the mount beeps and stops tracking. Afterwards, it

I use?CRC BRAKLEEN Brake Parts Cleaner.? Do *NOT* get the spray on the power-coat, anodizing or plastic.? Its also flammable...? Clean the parts outside.

Yes i'm here :) I made note of the feedback the answer (short term and likely longer term) is you probably need a different approach when setting your limits. The purpose of limits are to avoid *any

As long as you feel confident in working with them, Bill, now would certainly be the time to refresh all the lubed parts. And check for any irregularities while things are clean. After that, you can

Hi Anthony, I don't recall what mount you have, but I got around Meridian flips when I put the RAEXT on my GM811GHD. I didn't put the RA extension on solely for getting away from meridian flips, I put

Another thing to worry about with belt drives is that they can generate friction. But if you install small capacitors from each of the bipolar leads to ground (see the TMC chip datasheets) and have

Group, I have been having problems on my 10 year old GM8 with periodic jerkiness when centering while viewing through the eyepiece and with RA motor lag messages. Brian suggested that after 10 years

"Idiot", (me), proofing is the key point here. Take the suggestion for what it is worth. (Brian, if you are reading?) Twice now I had thought I had my limits set well, but because of poor planning and

I received my new G11GT? ?Mount (bought from Woodland Hills? ie www.telescopes.net )? ?yesterday. I have been looking at this mount upgrade for a couple of years .? Even with 4 previous mount /

Search through the message history in this group. I don't think it's official yet.

There's only a windows version. I managed to get it working under wine in Linux but then it needed ascom working in wine as well. I probably could have continued and got that working as well but

Hi deitzelj 5, , Great information and thanks for verifying damping. I love the look of the mount and have "experienced" one, but not with a long refractor like mine, so good to know your experience.

Great. Thank you. Very good advice, and help solidify my long term decision to go with the G11G. Thanks, Andrew -- Main Telescope: Explore Scientific 152ED APO Refractor in Carbon Fiber Mount: Explore

Hi Andrew! The Losmandy HD tripod might as well be a Pier. ?Rock solid. ?I use mine with both my GM8 and my Orion Atlas mount. ?I have the older version with the legs that come apart, rather than

Where can we find these? ?The Losmandy Youtube site? ?Thanks! JMD

I'm always interested in fixes for programs that give me a hard time. Which, come to think about it, is EVERY program. ;^) 8^) -- SonnyE Sonny's Youtube Channel (

Yes. Two piece. I may give that a shot. I am a little concerned since It seems pretty intolerant of alignment. Probably so, but have to admit to a certain aversion to belts and pulleys. Many people

I have been using velcro on mine. Bought the exterior grade heavy duty material -- doesn't peel off in the cold. Put the fuzzy material on the side of the controller and a strip on the pier. Had used