开云体育

Steve the 492 digital drive unit ?has no computer connections. ?However you can connect an modern ST4 autoguider and auto guide with the unit. What you do is remove the HC and plug in a 6p6c (6

Nice Deric - that's the way to do it wrote: -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

I abhor recurring charge crap. The only one I've signed on for is *Sharpcap ( https://www.sharpcap.co.uk/ )* , but I did that before I even got it working for me, based on reputation. Then I found a

This is my first post to this group. I have appreciated the insights from past messages as I have disassembled, cleaned, and lubricated a new-to-me, twenty-year old, GM8. I would like help connecting

Way to go Michael, Those little plugs came up about two years ago and I thought " Hey thats a good ideah. HAPPY SKIES TO EVERYONE AND KEEP LOOKING UP DERIC

I love a happy ending! Kudo's to Michael for the save! I got 2 of these *silicon port plugs (

Hi Russ, have a look at ACF50, it is an anti corrosion oil so may be a bit tacky but can be used on any surface including electrical connections, I have been using it for years on my motor bike and I

Very nice complete report, Russ. I am happy that repair ordeal is over. Use it in good health and have fun! More of the puzzle story....a long story: As Russ said, this was a weird Gemini-1

Hi Tony, Compatibility with the Gemini 2 is pretty easy. Years ago, Meade developed the LX200 command set and made that available as a standard to anyone who wanted to use it. Not everyone took them

Ditto.

Hi Russ Ethernet is RJ-45. the various serial ports are RJ-11 You can find silicone or plastic port plugs for either

You still need pretty good tracking to keep something on a small sensor for a couple of minutes. Typically focal lengths are above 5m and the ROI is a few arc minutes across. You can actually

I unfortunately had up scrap a G1 recently. ?Corrosion around main pwr switch fuse, and electro/and pwr DIN sockets. Water had entered and pooled inside the case lower corrosion set in land lifted

Thanks Brian for your useful comments. So am I correct in identifying the network type connector sockets as RJ-11 rather than RJ-45? If so I can get the correct Teflon plug. This can be inserted with

Hi! I use Ekos/Indi to control everything and capture. and I am more than happy with it. Fully automatic. You find it at indilib.org Best, Magnus Den 2020-10-07 kl. 22:51, skrev Tony Gabriele

Hey Tony, SGP has been serving me for about 3 years now and I have found it to be the most useful of those few apps I have tried. The plate-solving feature is super nice, where you can pretty much go

Hi Russ wow that's quite an odyssey. Hats off to Michael for the great repair, it sounds like regarding protecting the sockets, and more generally protecting the electronics you can buy soft

How pleased I continue to be with my 2008 version of Losmandy G-11. After 12 years the?Gemini-1?electronics had quite working. On the recommendation several persons on different forums I entrusted

I use kstars / ekos / Indi / phd2 on a raspberry pi. It does sequencing plate solving guiding capturing. Just about everything. PEC programing requires pempro to run on windows. Oh and skyfari pro for

As long as everything is ASCOM compliant you should be OK.? I use the current released of... * N.I.N.A. * TheSkyX Pro * PHD2 Guide * PoleMaster