开云体育

astromart or astrobuysell … Sent: 03 September 2017 04:49 To: Losmandy_users@... Subject: Re: [Losmandy_users] FS: Gemini-1 and deluxe hand controller I guess I misunderstood. Is there

I guess I misunderstood. Is there anywhere to find another board for a backup? John Hobbs hobbs_john@...

Thanks buddy! Scott found me on CN regarding my original clutch issue with the help of his assistant Tanya i think her name is. They said its normal and to wipe it off. Apparnetly these bearangs can

John, It was already sold (to someone else) when you asked. Dave Sent: 02 September 2017 20:23 To: Losmandy_users@... Subject: Re: [Losmandy_users] FS: Gemini-1 and deluxe hand controller

Hi Abraham, That's nothing to worry about, it's just the normal high pressure type grease the bearings probably came packed to overflowing with when the bearings were manufactured. I'm pretty sure

David: I'm purchasing the reworked board and I need to know how and what to pay you. Let me know as I really want the board. John Hobbs hobbs_john@...

How do I post photos to this thread? Or edit my posts? I did post some photos to my album of the blue grease.

I regreased and reassembled the Dec of my G11 and didn't see this blue grease at the bearing of the worm wheel. I don't know alot about bearings or these mounts so I'm wondering if something ruptured

Thanks!

Now sold. David

Good reply. You can also switch the cable output between DEC and RA too, and determine if the problem is in the DEC motor etc. vs the Gemini unit. Then you can get down to the possibility that the

Thanks, Michael. That was my first thought... but the behavior is uniform regardless of the source of command input. And I did investigate the worm mesh. It is very binary in that on command it either

Not long back I was sent a Gemini-1 for repair. Quite a few parts were toast including both the Qaudrature Decoder ICs, and neither René nor Scott had any to sell at the time (*). So on my no-fix, no

File : Guidance on Posting Documents and Pictures.doc Description : A few rules and comments to prevent anarchy in the files and photos section

Hahaha! I knew it was something obvious and it occurred to me a few times which I quickly brushed off thinking that the clutch works without it. Thanks for the encouragement! Abraham

You solved it! The clutch just locks against the worm wheel. The Oldham coupler doesn’t have anything to do with it; it’s to allow for misalignment of the motor and worm shafts when the worm is

I guess I should say as I came across this problem the only difference between the RA and DEC was that I removed the worm block assembly on the DEC. Hence , this is why it can spin round and round!!

I realized that when I lock the dec clutch the saddle moves with the large worm wheel. When the clutch is loosened the worm wheel and the saddle plate move independent of each other. Well uh......the

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Losmandy_users group. File : /Abraham photos/IMG_20170831_151256.jpg Uploaded by :

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Losmandy_users group. File : /Abraham photos/IMG_20170831_151218.jpg Uploaded by :