开云体育

Vishal, I'll also mention that regardless of which mount you buy as an imager you really want the bigger heavier Losmandy FHD over the LWT. IME the LWT is not appropriate for imaging unless left

Hi Edward That's a possibility. As Brian said it's weird that is exactly 90 degrees, and it did that once before under the same conditions. The thing is. NINA kept doing images well after that

Thanks Paul and Brian. ------------------------ Jim W Phoenix, AZ. USA Losmandy GM811G, NINA 1.11, ASI2600MC Pro, Sky-Watcher Scopes

The nudge is necessary if, for some reason, the mount DOES reach its WSL and go "beep". Without that setting, it cannot get out of the limit using a goto-slew. In theory, with parameters as set in the

Guilherme, Interestingly, your picture looks like a mount parked at a common "home" position. Any chance NINA just gave up on the centering, finished the sequence and went on to park the mount?? I

If the mount tracks into the safety limit and stops there, then you'll need this feature ON to be able to continue working using automation. Regards, -Paul

This is fantastic. Here are my settings: I did not have the Nudge feature switched on as it turns out. How significant to the flip working is this? Peter

[image: image.png] -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Setup --> Advanced Gemini Settings... --> Set Safety Limits --> Set Arbitrary Safety and Goto Limits... Look near the bottom of that window: Regards, -Paul

Where's this setting located? ------------------------ Jim W Phoenix, AZ. USA Losmandy GM811G, NINA 1.11, ASI2600MC Pro, Sky-Watcher Scopes

Yes, the rubber is simply a shim material that provides a cushioned directional force vector (vs. the mechanics of machining in bolts with spring loading). I am not sure a picture would provide much

The following files have been uploaded to the Files area of the [email protected] group. * /Edward-Gemini-NINA.xlsx ( /g/Losmandy_users/files/Edward-Gemini-NINA.xlsx ) *By:*

cool thanks for posting that Edward -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

I put a spreadsheet up on the group files that will allow you to compute consistent parameters based on my approach. /g/Losmandy_users/files/Edward-Gemini-NINA.xlsx -- Edward

LOL, a tale of two Pauls , I was asking Paul Kanevsky if he knew anything about the Gemini-ASCOM support for "CanSetPierSide" and was asking Paul Borland if he would post his parameters .... Sorry

Thanks Brian, I am planning to re-run this all step by step hopefully tonight. I am not doing any Gemini PEC, I just enabled the PPEC algorithm in PHD2 - I thought that was the recommended one to

moved the DEC axis 90 degrees from where it was supposed to point. 90 degrees is a little too specific for a random goto bug. That sounds more like a settings issue

Based on this data, i'd say your polar alignment is off by quite a bit, and the GA also indicates this you can see [image: image.png] looking at your guidelogs, i think you are trying to do too many

Hi Jim I haven't tried yet, but I can try tonight. Yesterday after my failed test I went back to 1.10 HF3 and restored my config which worked before. This morning when i went outside to check on the

Thanks Brian, Here is a logfile. Some of the data is during guiding, and some from guiding assistant