开云体育

How long is your RA cable? My RA cable is about 19” end to end, I have the tucked in motors. RA doesn’t move relative to the gemini, so I’m not sure if you have an unusual cable or something

I'm tired of worrying about my DEC and RA cables being so tight and just want an extra foot of cable for my G11t. My RA went nuts several times last night and after a few hours of troubleshooting, I

In that case the user hadn’t read-booted after changing mount settings! Is this the case here? -- Brendan

PS here's one of the threads: https://wiki.gemini-2.com/index.php/279/gemini-titan-slews-twice-setting-from-produces-pdec-errors [email protected]> wrote: -- Brian Brian Valente portfolio

HI Paul can you give a little more information? like what mount, under what conditions did this occur, and is this a new mount, used, and if used what is the age? i did some sleuthing and all i could

Am looking for enlightenment on "PDEC Out Of Range" Any help is appreciated.

I've owned my G11g for a year now and have only used it with the basic turn it on, cold start it and get to work. ?I'm really interested in beginning to learn about modeling, PEC and all the other

Just to toss in my two cents! ?I had the same problem. ?Mainly on the RA axis. ?I bought the washer and presto! ?Problem solved. just be really careful when you take it apart and make sure you

The demonstration in the video - is that what folks are talking about when they refer to sticky RA? i have that too, but i don't find it to be an issue. I mostly watch how fast or slow is the

I was wondering if the newer clutch pads might have the larger opening required to add the wavy washer - John's photos were very clear but I couldn't remember if the bottom surface was clutch pad or

What John K. said.? I have an older mount and am at 44N latitude, and definitely could use it but don't have the slot.? Trying to balance RA at 44N is total guesswork, so if I change equipment and

John, Glad all worked out for you. From what I understand, not all older mounts have this washer slot, and I'm not sure when it was put in. Buyers before 2015-2016 may not have this option. Maybe not

Losmandy will be there, you can ask them in person about including the wavy washer :)

It’s the kind of thing you’ll like if you like this kind of thing. ? They do an excellent job, with relevant talks by competent speakers, and have some fun leavened in. But, unless you happen

I have.. If you are an imager, it is the place to be as ALL the best imagers will be there.. Derek Morgan Hill, CA _____ Sent: Sunday, October 06, 2019 8:43 AM To: [email protected] Subject:

Just put in the wavey washer that I bought from Losmandy.? Seems to have fixed the issue on my mount. There's actually a groove in the clutch plate to hold the washer, and from what I understand

Hi everybody, sorry for getting back so late. I had some serius troubles in my family. My mum passed away and we had to reorganise my father?s life. The plan was?to use the G11 for my LZOS TMP 152/8

Has anyone attended this in the past?? I'm thinking about going - my employer's HQ is in Palo Alto so I could potentially work in business with this conference! :)

?I thought it was the new clutch plates shipping since 2016, not a washer in the clutch. Not sure though... Thanks, John

Thanks John. ? I guess I should pull my mount apart someday....it’s time for an overhaul! ? Been factory default since 2008. ?Worked fine out of boxes. ? Hahaha -- Brendan