开云体育

Bought my G11 with Gemini 2 new in 2017. I has worked perfectly for all these years with not much maintenance. It does not have the tucked in motors. I just recently noticed it is getting a bit noisy

The casters look to be the same model used on HF's dollies designed to support a vehicle's weight at each tire which I've used. HF has a pretty large selection of casters. I like the kick down lever

Mike, I agree with most of what you are saying. I particularly agree that the Anderson Powerpoles have a lot of advantages, they are solid, make a good connection and a solid contact, have good

I haven't hiked it, but have driven to the top of Mauna Kea.? Fire is probably not a big concern, except for the effect on seeing if a large fire, or volcanic eruption were to occur with winds

I've observed the same behavior with my g11g. I took it (mount RA head and mini) in for the software and firmware upgrade and asked Scott to check the SLW. He re-adjusted it and same behavior. I

I use these under many of my shop tools like table saws and band saws. The wheels are most likely too small for traversing gravel, dirt or grass but the concept is simple and buying one of these to

In a better world . . . I’m wintering in Baja far from my scopes and have run out of new places to explore on my dirt bike thus I’m reduced to browsing through the 80,000+ messages on here.

I received email from Mr Nugent this AM.? Very good. I worked for 4 startups in Silicon Valley in 80s-90s timeframe.? All went belly up.? I'm still poor. :(

Here is one more video that shows the actual worm BLOCK adjustment: Here ( https://www.youtube.com/watch?v=LmcEYhat7jE&list=PLeM-apAbabi3fDW_qj93eHmrKFDfhRjfn&index=1 ) Sorry, this is the one I

Hey Ryan, Ryan here. I've been where you are. I wrote this post to explain my approach to the spring loaded worm adjustment: SLW Worm Block Adjustment (

And to further clarify. I have a good PA within 30 arcsec of error. Seeing is not the issue as this is consistent across every night.

I sent my mount in within the past 6 months to get the L6 upgrade, ra/dec extension, and springloaded worm addong. I started noticing after this it is taking forever to get calibration and after

Well, the tree line is well below the telescopes on Mauna Kea, to be sure. I hiked it a few years back with an altimeter and I think the last of the large vegetation stopped around 8,000 or so feet,

sorry I meant to go and get the image immediately. here is my current setup.

Sure though I have updated it, and i think my ulitmate plan is to just move the gemini way out of the way. I just ordered 2 of

In the book, "Glass Giant of Palomar" about the design and construction of the 200" telescope, they dwell a bit on the fire issue. A loss of the ground cover vegetation seriously disturbs the local

*"*"Too rich to justify the work."? :)? There's a nice problem to have!" Y&es.? I spent much of my 20s and 30s working for telecom and networking startups.? How to become wealthy.

I use these under my various shop machinery including a 500 lb. band saw (somewhat overloaded in that case but it still rolls about without the use of slaves and a whip). The wheels are perhaps too

As a retired emergency manager in Oregon, I've seen the increased risk of urban interface fires spread across the West.? With anthropogenic climate change continuing to warm the earth, I'm afraid

In the days long, long ago when I I owned an iron for dealing with my laundry I had not only an electric iron and an ironing board but an accessory that controlled the cord to the iron. I have no