开云体育

I received email from Mr Nugent this AM.? Very good. I worked for 4 startups in Silicon Valley in 80s-90s timeframe.? All went belly up.? I'm still poor. :(

Here is one more video that shows the actual worm BLOCK adjustment: Here ( https://www.youtube.com/watch?v=LmcEYhat7jE&list=PLeM-apAbabi3fDW_qj93eHmrKFDfhRjfn&index=1 ) Sorry, this is the one I

Hey Ryan, Ryan here. I've been where you are. I wrote this post to explain my approach to the spring loaded worm adjustment: SLW Worm Block Adjustment (

And to further clarify. I have a good PA within 30 arcsec of error. Seeing is not the issue as this is consistent across every night.

I sent my mount in within the past 6 months to get the L6 upgrade, ra/dec extension, and springloaded worm addong. I started noticing after this it is taking forever to get calibration and after

Well, the tree line is well below the telescopes on Mauna Kea, to be sure. I hiked it a few years back with an altimeter and I think the last of the large vegetation stopped around 8,000 or so feet,

sorry I meant to go and get the image immediately. here is my current setup.

Sure though I have updated it, and i think my ulitmate plan is to just move the gemini way out of the way. I just ordered 2 of

In the book, "Glass Giant of Palomar" about the design and construction of the 200" telescope, they dwell a bit on the fire issue. A loss of the ground cover vegetation seriously disturbs the local

*"*"Too rich to justify the work."? :)? There's a nice problem to have!" Y&es.? I spent much of my 20s and 30s working for telecom and networking startups.? How to become wealthy.

I use these under my various shop machinery including a 500 lb. band saw (somewhat overloaded in that case but it still rolls about without the use of slaves and a whip). The wheels are perhaps too

As a retired emergency manager in Oregon, I've seen the increased risk of urban interface fires spread across the West.? With anthropogenic climate change continuing to warm the earth, I'm afraid

In the days long, long ago when I I owned an iron for dealing with my laundry I had not only an electric iron and an ironing board but an accessory that controlled the cord to the iron. I have no

I'm in California.? Sounds like a lot of shipping cost. Ugh.

"I looked at the scope roller site and it said they are doing make to order no inventory. Perhaps it's due to capital inventory cost and level of demand. I have no idea.? " That was always how I did

OK, I give up..... my attachment got stripped as well. Last gasp.... lets try a link: https://www.pgoelz.com/stuff/dolly.JPG Paul -- Paul Goelz Rochester Hills, MI

Sigh.? Looks like the list stripped off my embedded photo.? Here it is as an attachment. Paul -- Paul Goelz Rochester Hills, MI USA pgoelz@... www.pgoelz.com

I posted earlier about my solution made from a JMI Wheely Bar. Here's a photo in case my description wasn't clear enough. I find this is the best solution I have seen yet.... it is easy to build, easy

Not happy with CN build. The height of the center of gravity makes me nervous. Buy the time you get the wheels up you'll have three kind'a skinny columns supporting everything. See this CN H-D

Georgia, USA [email protected]> wrote: