开云体育

Hi Brian, that is exactly what I had been trying to do. The amount the mount is off is enormous. Probably 7 or 8 hours of arc off. However, once out of about 20 attempts of re inputting my info it

Thanks Sonny. I tried the reset in the video, but the settings stayed the same, except the date. It does not seem to reset everything. Thanks for your help, James

Hi Brendan, i checked the voltage on the new battery I recently installed. It was 3.03v, almost the exact voltage of the battery i replaced. I installed a brand new battery with 3.29v. I am still

Hi James Welcome to the group...!? You should also check out the Gemini-2 site. /g/Gemini-II/topics Jim W

Welcome! I also upgraded from an AVX, I'm so happy I did. Nowadays I'm always imaging. I cold boot the losmandy, and the first thing I do is slew to the meridian, south intersection and platesolve /

Hi James Sounds as if your battery is ok butt can you give an indication that the top "finger" has good downward pressure on the battery??? Just visually.? Remember lifting it with power off will

Hi James For official support it would be better for you to email techsupport at losmandy dot com Entering random times isn't going to help you :) Check this: do the reset described previously do a

Jeff what version PCB is your Gemin ( https://gemini-2.com/pcb-pictures.php ) i??? Is it one with the CR2032 battery? If "yes" .....the battery holder positive has 2 small "finger" clips that

Basically, what the title asks. I have an older Gemini 1, L1.02 control unit.? It seems to go through batteries, draining them in a matter of minutes, getting CMOS resets only minutes after changing

Hi Brian, I followed your instructions and out of about 20 times, once it pointed correctly. I have tried inputting the information myself, and allowing the GPS to input the data. I also tried

O.M.G. PEC spikes!!! I'd never ever guess that one! So many Sci Fi movies have the same theme: glitches in the machine code. From Westworld to.... you name it. I was also thinking of the great movie

Hi! Michael :) Thanks. I was only thinking mechanics. But there are other things. And what might cause problems when you're not thinking of it? PEC Turns out, I had PEC turned on. But it should be

Hi James, Welcome to the group! There are a lot of guys here from around the world that are well versed in Losmandy Mounts going way back. So you came to the right place. -- SonnyE Sonny's Youtube

Hi! This clearly affects my imaging. The spikes produce doubled stars, so to speak. Subs not usable. So it needs to be fixed. I totally agree on the slightly wiggly-jiggly graphs :) But this one

How is your imaging? Just because you are getting some jags does not mean you have a problem. If it shows in your imaging and is insurmountable in processing, that's a problem. But in my experiences,

Hi Chip, Definitely a very brassy color. One thing I noticed is I have to turn the clutch knobs with excessive force to get the scope to have a stiff resistance to moving. Daniel said there might be

I can't speak to the older, or first generation Gemini II units, mine is very newish, February this year. But... have you tried a Factory Reset? Then enter your own Lon-Lat, time, and date, and

Hi James, I'm one one the rarities in this group: I only have Gemini1 units so far. Many of them.... So I cannot say explicitly that your Gemini-2 is exactly the same as what I wrote. You will have

Thank you Brendan, When I had the mount connected to the web interface, the voltage was good. last night I was not able to connect through the ethernet (blaming on the new windows update), so my only

Hi James - Brendan made some good suggestions for you 99% of the time this kind of issue is from incorrect Gemini settings for date/time/location/timezone. So first is to make sure the info you are