开云体育

Hi Sean, If the GFU has 5.2, that should be easily selected. The Beta ware for L5 I used had some advantages over some older L5's for runaway slews, but I am now not sure if L5.2 is the same. I don't

The clicking only started just post L6 upgrade. I had been imaging for a few weeks without issue.? I should point out, the coordinates listed above are the output from NINA when attempting to center

Sean, Sorry to hear of your ongoing troubles. From what you have said your mount was working well before L6 without mechanical issues. So, you do have the option to change back to see if things

So good news, bad news, and more bad news. Tonight we had clear skies so I went out and did polar alignment, then used NINA to slew to M81. It actually went there, and from the first image I could see

In L6 release: If you reserved the Gemini-2 MAC on the local home router then upon start, the router DNS assigned your defined IP for you.? In that case if you want the displayed IP to become Static,

Traducir texto con tu cámara Hello David, I am looking at options to update, if I don't succeed, later in the year I will write here again in case you have time to update to level 6, moving is not

With L6 this shouldn't matter when used with NINA. Either way should work. The setting may be needed with other ASCOM software that do not automatically adjust for the configured precession.

Sorry to say but I am still in chaos after moving house. I have not time at present to do updates or repairs. I may be in in a better position later in the year, but things aren’t even remotely

You might be best to contact David Partridge ( https://gemini-2.com/G1-repairers.html ) in UK to do it for you. ?At least the postage is cheaper ? ?He wrote the servo code so is well snd truely a

After re-loading the firmware through GFU I did reboot, and even powered cycled the mount. Upon reload the network settings did not change. I have a static IP set, along with gateway, DNS, and NTP. I

Sean, After reloading the L6 ware, have you rechecked that the IP address in the HC is still what it was before? This can get reset to defaults and you may need to re-enter. Then go to your Network

It seems like you have a very basic configuration issue or corrupted data files in the Gemini 2. Maybe the format option would help but also maybe try resetting the microSD card in the socket before

I just used GFU to flash it again for v6.0.2. One button I did not touch, the "Format SD card". Wondering if I should have done that as well? On a side note, last night I had problem with my Pegasus

Sean, This sounds more like you have a corrupted or incorrect file somewhere. My suggestion would be to download the L6 and new hand controller files again and use the GFU to upload them again to your

The problem continues even with doing a model. I started the evening by going to Vega which was clearly the most visible star. Used by guide scope to center it and synched. Next I did I think

I think some people switch the donut and wavy washer, but the first arrangement is how it comes from the factory. *** Absolutely!.. The Wavy Washer goes against the clutch knob.. This puts both thrust

Hello, did anyone from Spain update to level 6? I would like to update and I have no idea. greetings

Hi Dale, After reinserting the shaft through the mount, the components go on as follows: flat washer, thrust bearing, flat washer, wavy washer, anodized black donut, clutch knob. I think some people

John, Thanks again - roughed up the clutch disk, and hope I got the washers and bearings correct (they always have a way of getting jumbled up ;-)? Wonder if there is a printed diagram somewhere of

Hi Chuck! There are a few different versions of the ADM ALT/AZ aiming device, the Mini-MAX, the MAX, the MAX-HD and Robin Casady design TGAD. After using the TGAD for a while I bought the MAX Alt/Az