开云体育

An Aluminized bag? -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric Weather Forecast - South Pasadena, CA Astrospheric Signature (

Its because you have been active on here, It will not see the account as spam is my understanding. If you want to make sure I think you just log out and log back in.? That's the way I read it.

Okay thanks, so I guess I am not going to get one at this point.

Pete, not everyone is going to be asked to re-verify their email. If you didn't get the email from Groups.IO (not from me!) asking you to verify your email, you don't need to do it. That email would

I never got an email to verify my email address.

You guys have got me looking at observatories online. I'm just starting to venture into astrophotography. Greg Morris Vanceboro NC

Folks, one more reminder! There are nearly 400 users in this group that have been contacted to be re-verified, but have not yet taken the steps to re-verify their email. If you don't take the

I live in eastern Ontario where it occasionally gets pretty brisk. I have imaged with my GM8 down to around -10C (14F). Things work, silicone cables are a tad stiffer. But the astronomer is finding it

I live in the Buffalo area. It has not been that uncommon to hit 0 degrees on the occasional rare January/February night when the lake effect machine has frozen over and we have clear, calm skies. I

It was actually in Endicott, NY in late November/early December some years ago (early 1980s if memory serves). I arrived on a Sunday with quite pleasant temperatures in the mid-late 60s F, and a

Geez Dave, that must have been in the way back! Seeing below zero, or "bows & arrows" as my sister-in-law calls it, is rare here in the

Last night in Ohio it was 5 above and I had a good night of imaging with my G11.? There was a 5 to 10 mph breeze that seemed to keep the mirror on my newtonian from frosting.? Everything went really

IDK what the official low temperature limit is but I've used the G11G in the high F teens no issue other than myself freezing. Here in Southern California high desert areas we routinely see from mid

I'm next door to you in Illinois and I've used my GM811G down to about mid 30sF, no problems. This time of year I though I always bring the optical tube assembly with photometric filters inside as

Thanks for the feedback. I wimped out and opted not to set up as the temp is dropping past 5F already. Didn’t relish the thought of schlepping stuff out there, adjusting PA, etc., even though I can

The main issue is that at those temperatures the gear mesh on the non-spring-loaded worms will need adjustment otherwise they will bind. Even the spring-loaded worms may need adjustment down at 0F

I've imaged to around 0F. Electronics, cables, laptops, batteries, etc. become a lot harder to operate, but the mount worked. I wound up operating everything from a laptop in a warm room, but setting

I have imaged down to 15F without issues. ------------------------ Jim W Phoenix, AZ. USA Losmandy G11G w/ L6, NINA 3.0 / ASTAP, ASI2600MC Pro, Sky-Watcher Scopes, Canon L Lenses.

What's the tolerance of mounts, and other gear to cold temperatures? We have had lows in the single digits and below zero (F) here in Indiana, as elsewhere, lately. I'd love to take advantage of the

Folks, please don't reply to my email to verify! When you receive the email I mention from Groups.IO, that's when you'll need to respond or re-login to Groups.IO website. Sorry for the