开云体育

Hi Jeff The spring loaded worm is a different kind of animal. it's not going to behave in the same way as regular geared worm/worm wheel meshing. The spring needs a certain amount of flex to move, so

Hi Ron, Like Jamey just said, when I have some pointing trouble, I do a Park at CWD, then shut off the Gemini power. Then I set up the CWD position: I loosen the RA clutch. I then use a "torpedo"

Hi all. I have an RA/base assembly of the GM8 ( I bought from someone upgrading to the g11 RA assembly). I want to use for my solar scope. I only have the older servo motor and gearbox but no

Thanks, Brian. It does help. My new mount has far less play than my old CGEM mount, but a tiny bit more than my CGX-L. I can send a little video of the Dec movement and sound. Between the moon and

Hi Ron If you warm start from CWD, try a goto and sync on the first target. that should sync your existing model with real-world Brian [email protected]> wrote: -- Brian Brian Valente portfolio

I do a cold start with CWD every time and do a modeling. Pier mounted too... Jamey [email protected]> wrote:

I have now have a ROR for my G 11 G on Its tripod And I am having problems with restarting Gemini 2 back on My problem is when I restart I am not getting a good initial goto so my question is - what

Brian, I was wondering how much play the Dec was supposed to have. I have rotated the Dec though 360 degrees several times. It is tight and noisier through 90 degrees. 270 degrees of the arc, the Dec

Hi Henry Yes you can do meridian flips with your Titan. This is a feature of - and controlled by - Maxim DL. I personally don't use Maxim so I can't tell you how it works, but I do meridian flips all

Did I read this correctly?? I thought Maxim DL 6.0 would allow one to track and photograph until the mount reached the set flip limits, flip, require target (using pinpoint), and continue on with

Hi Jeff if you can get an audio uploaded (or we can do a zoom or something else later today) we can figure out if the sound is a problem Regarding play in the axis, your new G11T has a spring-loaded

Brian, Thanks for getting back to me about this. I am hoping we can start over. I did find a battery that puts out 16 volts. It powers the Dec through the range of motion without warning messages, but

I really appreciate your getting back to me about this. If we can start over with this conversation, that would be great. I found a b ________________________________ Sent: Monday, August 24, 2020

Simple https://www.youtube.com/c/LOSMANDY/videos

Hi Jeff My apologies - that wasn't my intention at all, so please let me try again: Most importantly is getting your mount running to your satisfaction. I'm super glad people are helping you here. IF

Hi Dave, Which model of mount? -- SonnyE Sonny's Youtube Channel ( https://www.youtube.com/results?search_query=sonny+edmonds ) (I suggest viewed in full screen)

Brian, As I am sure you are aware, new things are often discovered as we use mechanical things. They all have their little idiosyncrasies. This was not an inexpensive item and I should be able to

Hi Jeff, A long way off, but when I got my GM811G HD, I mounted the motors as instructed. The Dec axis was a bit loud. So I did the described 1/4 turn loosen and tried adjusting the motor. It got

Thanks Deric. Michael contacted me and has been very helpful. He even gave me his phone number if I needed to have a conversation about my mount. Jeff ________________________________ Sent: Monday,

Hello Jeff, I use a 12v LifPo4 battery plus voltage pump made by our very own Michael Herman, that boost the voltage to I think 17.3 volts to help prevent motor stalls. It works very well and it also