开云体育

Rob, Here are some initial thoughts: Reset your Gemini by taking out the internal 3v battery for a few minutes. Replace it with a fresh one, just in case Make sure you set all correct settings,

Rob, my guesses ...follow: 1. Use Gemini.net to look at the values of your Model (the "T-model"). When the errors occur, write down the parameyers and their values. Then "reload model from PC" which

Futher update. Tonight it did the same thing on the third frame. This time I went out to check the mount before I sent it to CWD. I found that it had tried to "bend over backwards" or in other wards

Hi everyone, For two nights, I have had exactly the same thing happen. I am taking a four plate mosaic of M31. The first plate goes flawlessly, but when the command to move a small distance to the

Hi Magnus, How fresh is your battery? If you have not changed it out in the last few months put a DVM on it and check the voltage. The other issue I have had when my Gemini 1 acted weirdly like this

Hi! Lately, I've run into some problems with pointing my G-11 with a Gemini 1. For instance: I cold start the moint, then choose Go to bright star, Choose Vega or Deneb - high in south. ANd I get

Ron, <How do you think we know these things?!> I didn't set the limits for a long time...didn't quite see them on the handset menu and didn't discover the easy way on the Gemini.net applet til a year

thank you both for the thoughtful replies I have a 1 yr old Gemini 2, and although I tend to adjust the clutches rather snug I guess the worm gear didnt get damaged - as you say I have not detected

Okay thank you very much Linda. Clear skies Chris

It's automatic once a month. Dan -- Sent from my iPhone. Please pardon any mispelings or errors.

I think you should be at -4 for DST. typos courtesy of iPad

Hi Group I keep forgetting this but what time zone should I be using now for daylight savings time -4 or -5 in my Gemini 1 level 4? I live in Ontario same time zone as New York. Thank you! Chris

Please delete me from your Documents and Posting emails. Thank you. From: Losmandy_users@... [mailto:Losmandy_users@...] Sent: Saturday, September 30, 2017 8:17 PM To:

High Ron its just etiquette to sign your name...so we know who we are replying to. I assume its a Gemini 1 system? If so you can set Ra limits to stop this happening. Although yes I've had a Ra clash

Scary as that sounds, you should be ok. Your slippable RA clutch should have prevented serious damage from the slow motion collision. If you are using a Gemini unit, I'd suggest you use the nice

doieee I left the mount power on all night and discovered the scope smack against the leg the following afternoon Tracking seems to be OK, Ive not yet discovered any difference in handling,... but is

REPOSTED with the missing information: Hi Chris, My brain was not registering what you had posted. The Losmandy G11's clutches are not at the adjustment knob end of the axles, the clutches are at the

File : Guidance on Posting Documents and Pictures.doc Description : A few rules and comments to prevent anarchy in the files and photos section

The easiest way to see what's up is to take off the motor and worm. If it's free when the clutch is loose and binds with the clutch is tight, then there's likely an alignment problem. It only took 5-6

Hi Linda, The Pelican 1620 or iM2750 with their taller height will both carry the non-tucked motor G11 mounts. I use Pelican 1620 case for my portable studio strobe systems and my G11 before the