Tim,
?
If you are tightening down the clutches because you have slippage, it sounds like you have oily discs as was mentioned. But instead of a wrench you may wish to invest in the Losmandy clutch knobs which have the three handles, and which are more easily turned than the original smooth ones. Rubber gloves work better than bare hands also. One final snug should do it. If you watch the Losmandy videos on YouTube, that should give you an idea of how to adjust the worm tension with either the spring-loaded or earlier types.
?
Good luck,
?
John
--
_____________________________________________________________________________________________________________________________________________________________________________
Losmandy G11G2 on pier; refurbed Losmandy G11 with OnStep controller; SkyShed design roll-off observatory; ZWO ASI2600MM-P; ZWO ASI071MC; Sky-Watcher Esprit 100 ED with field flattener; Celestron C925 Edge HD with 0.7XFR, William Optics Zenithstar 61 APO; PHD2, NINA, Sequence Generator Pro and PixInsight user
