For what i learned from my g11t, the small Allen screws bite into the thread of the (in my case) 9/16 Allen bolts which have a to allow vertical movement. So the small Allen screws push the 9/16 and then the worm block into the RA crown. Because of that the RA worm block it¡¯s kind of tricky to adjust.
El El mar, 7 de nov. de 2023 a la(s) 23:52, Gerard <gford@...> escribi¨®:
Late to this folks, travelling this weekend. I'm kind of confused with the use of bold and studs. The 9/16" bolts screw into the RA worm block from the bottom of the mount fixture and are held in place with nuts.? The Allen head screws are inserted into the top of the fixture and provide lift to the worm off of the Ring gear when tightened.? The 9/16" bolts have holes drilled through them that the Allen head screws pass through to provide the required lift.? If you did not remove the 9/16" bolts from the worm block or spin them so that the holes are not aligned for the pass through, then you should be OK.? I don't believe the Allen head screws are used to lock the 9/16" bolts in place.? The 9/16" nuts do that.
