Thanks everyone for the help so far.? Lots of good suggestions here that I will try out tonight.??
Whenever you enter some new primary value (Latitude, Longitude, Date, Time) you must then turn the Gemini off and "Cold Boot" restart. ? That is because the Gemini still uses the values it read from memory on boot up, and not the new values you entered.? ?Most other programs use the new entries immediately....not this one.
This is probably part of the issue.? I did not cycle power to the mount immediately after updating the factory values.? After the first erroneous goto, I double checked everything, but did not cycle power immediately.? My guess is that I started trying different settings before restarting the mount.? I also used "Quick Start" instead of "Cold Start."? I'll check this tonight.
I also noticed just now that the mount type was set to G11.? I swear I changed this before observing last night, but since I did not do a Cold Start, it must not have updated.
I'll also make sure to verify the cables.? I think I checked them 10 times last night as having them backwards was the first thing I thought of.? Can never be too sure though.??
I am going to set up this evening before it is dark and try it out before it is dark.? I will report back and let you know if the problem is solved.
