Thanks everyone,
Wish me luck tonight. I have reinstalled the firmware--it appears that I already had the most current, but I reinstalled anyway. I went line by line through every setting in Gemini to make sure that they were all correct--to the best of my knowledge. I confirmed that there is plenty of power in the battery.?I installed the latest version of the Gemini.net ASCOM driver. I am going to reinstall SGP, just to make sure it isn't the culprit. I had one other thought that maybe the network cable between my computer and Gemini might be faulty. If what I have done so far does not solve the problem, I will try changing that.
As far as the model goes, I'm not using modeling. I have for some time been letting the plate solving software in SGP direct the mount. This is why I suspect a communication problem, though PHD2 has performed flawlessly through all of this and it uses Gemini.net also...we shall see.
What are good safety settings for the mount. I have 124degrees on the?right and 114 on? left. These give left side safety position of 1881600 and right side of 365800. The Western goto limit is 2 degrees 30minutes. This does not seem to be working, as the camera hit the mount.
I really appreciate your responses.
Rob Fink
