开云体育

I do not have a dummy load, but I am able to measure the draw from the PS to the radio: 40m 1.6A 13.98V 25 Watts 6.2 Watts out 1.6 SWR 20m 1.6A 13.98V 22 Watts 8.5? Watts out 2.8 SWR

Military Power :-) I will check ALC

If you’re getting over 12 watts to the antenna you are already over driving the radio. The LP-100a should be more accurate than the meter on the TX-500. Might want to check the ALC to make sure

I see 27.8w from the battery ( powerwerx meter) and 12.1w to the antenna with SWR of 1.36 measured on an LP-100A, there is an elecraft T1 tuner in between the radio and the antenna- 40m inverted V

Does the radio do this (FT8 40M) same into a dummy load? Can you measure power with an external power meter (if you are not already doing this)? Can you measure DC supply current going into the radio

Trying to get 10 watts for FT8 for 40m. I can get 10 watts for FT8 on 20m. I can get 10 watts with other modes on 40m. Using a 20m/40m OCF antenna. Using a creative labs USB sound card with a REM/DATA

I ordered mine today from HRO. ?I’m on the back order list for the next batch, which should be here by early August. 73 de Rich N2RIC

It was the cable - one of the connections on the audio input was sketchy - I soldered it again and got things working - thanks

Yes sounds to me like audio isnt making it to the radio. Do you have the right sound devices selected in WSJT (this was my problem) Do you have the volume up Could be the cable, you can put a scope on

Juste received émail yesterday and mine is on the Way order Was 17 May Tes ve2kh Envoyé depuis mon appareil Galaxy

I just got my TX-500 today i tested it using SSB and CW all good i built a data/REM cable - I admit it's not pretty but seems to work at least for output from the radio i configured WSJT and I have

On the downloads page from 8 June - https://lab599.com/downloads/ 1.??Improved the CW beacon mode: fixed the interrupt function of the transmission. 2.??Optimized the CW frequency matching

Enjoy it Joe! It's a great little rig. I had mine out on a camping trip this last weekend. The performance surprised me.

I also got the email yesterday about mine shipping, should be here Friday. I'll be heading out to a local park to give it a test run this weekend. Joe W6VIP

George, Call this guy: Rick Hernbrode | WI9RAH Sales Ham Radio Outlet 5710 W. Good Hope Rd Milwaukee, WI 53223 414-358-0333 Tel 800-558-0411 Tel Nick Marsh WB4SQI

Get them on the phone. Something isn't right. My wait was three weeks from order to arrival. Far sooner than expected. The deletion from the orders is scary. Get them to figure it out so you get back

I am out of lick. Ordered on May 10, payment processed May 12. No tracking. And even worse - it has disappeared from my "web orders". What is going on, HRO?

I got the same email today! Looking forward to the brown truck arriving. Nick Marsh WB4SQI

Alan, Congratulations! Enjoy... 73, Henry - K4TMC

Hello All, For those waiting for the TX-500, I just got notice from HRO that one I have had on backorder for about 3 weeks has been shipped this afternoon. ?So they apparently are in the States.