开云体育

RG316 works good for me. Nice and lightweight and in short runs losses are not really noticed, just be careful of kinking but when laid out straight it does (for the most part) not want to jump back

On the Packtenna website you can buy a 20 ft section with BNC connectors for a very reasonable price.

For portable work, RG316 works well for me.

Just curious what people are using with there TX-500. ?I purchased the ABR 25400/F (LMR400) Coaxial cable about 50 Ft. ?It appears to work without issue with reports coming in 5-2, 5-7, 5-9 and

That is unfortunate, please keep us updated

No SWR on my dummy load and my antenna has low SWR.? I also have a KX2 and using the same cables and all, everything is fine. It looks like John was emailing me, but they weren't getting through.?

Richard has many good points, had the same issue with 2 ?ABR cables: “I?have had PL-259 connectors where the threaded portion bottomed out on the SO-239 before the connector was actually tight

Like VA3SYS said, check the SWR (just to the right of the TX power indicator on the TX-500), or use the built-in SWR meter function (see p.22 of the manual), or use a separate SWR meter.? Even with a

Check your spam filter. I answered you about 4 hours later. [email protected]> wrote:

Is the swr low when you hit tune button ?

Well, I'm not sure what happened, but my TX-500 has no TX power.? Did a factory reset and still no go.? Even when I hit the tune button it shows no power going out, dummy load, etc. I put a call

Dont think they have any stock outside of russia at the moment, i contacted them after placing the order online and this what they replied: “Purchase section is running in test mode, we evaluating

Sorry Henry - I didn't read the title before responding yup - it's just a plain power cable, you'd need to add a fuse

Can it be shipped from Europe and not Russia?

The Pro Audio Engineering TX-500 power cable I received a while back did not have the 3A fuse. 73, Henry - K4TMC [email protected]> wrote:

Amazon has GX12 aviation connectors. I ordered them and made my own. If you find them already made up, please let the group know.

You can get one from pro audio engineering for $12 and either use their power supply ( which is great) or cut the connector and use a battery

Also look up the W2ENY storefront on eBay. No connection, purely for info. Richard M0RGM

Wow very nicely done. I will look at making my own cables. Thank you

Lab599 now sells radio and accessories on their website: https://lab599.com/purchase/ but if you have been affected by sanctions, they may not be able to ship to you at this moment. alternatively if