开云体育

CW OP, firmware 1.16.06: I know the AF Gain has two independent settings, one for adjusting RX and one for TX sidetone volume. Normally, I have operated the TX-500 at 100% power (sometimes down to

Norn et. all, CB channels was good practice for me.? The real benefit is to have some known frequencies for QRP calling while activating some remote locations.? One less thing to think about while

Having studied this a tiny bit and learning how the Digirig interface is built, I've learned that the CAT interface is isolated from the rest of the radio to help with RF noise affecting the

So maybe the PC supplies power (e.g. 5V) to the FTDI plug/chip with 3.3V then going from there to the TX-500??Any idea what it means on the wiring diagram when it says: " *Change the power supply to

My googling says the host usually supplies power to the device on a usb to usb connection the lab 599 cable is host to serial G12, so there's no USB power negotiation to be had. in the lab599 wiring

My understanding is that many rigs provide power to drive a USB device (e.g. such as the FTDI CAT cable shipped with the TX-500). Does anyone know whether it's the PC or the TX-500 that provides the

Just loaded them in.....whooie good buddy !

Tim: Also Interested. Matt W7MDN

Gary Priest (K8JOK) Mar 24 #3192 ( /g/Lab599/message/3192 ) Yes, TRRS connector that will use the earphones and in-line mic.? Based on my testing, I've found the following

Speaker and mic grounds appear to be isolated--there's separate cables for each element and there is no DC continuity between the grounds.

Thanks, I get it. I was just curious about it but mainly interested in the channel programming feature, not for CB use but for HF. -- 73, Norm/KC1BMD

Is the headset speaker common connected in any way to the mic & PTT common?? Since the TX-500 speaker outputs are 'balanced', there can be no connection to any common/ground. -- Grace & peace, Tim

Norm, I have friends who still use CB so this allows me to "stay in touch".? I started in that unlicensed mode back in the late 70's and it was part of what helped me to be interested in upgrading to

Yes i would be interested as well Matt, KG8TRS Thanks, Matt Allinson, KG8TRS

Just wanna talk to my good buddies....what's YOUR handle ?

OUTSTANDING OM !! es mucho tnxs de "baab", w9ya

CB channels can be handy while traveling for traffic/accident advisories (besides, 'smokey' lookout reports) :-)

Norm... Yes, that's exactly the purpose. As for the CB channels, I guess that's what makes this hobby so great; We all have different interests. It's nice to see different aspects included in

Hi Nick, looks good, but shipping to Europe doubles the price - so a little expensive then.

*Uninformed user with a question:* What is the purpose of this feature? Is it so you can store a particular frequency and get to it faster than by manually changing bands and spinning the VFO knob to