开云体育

Given delivery of the radio is sporadic and delayed, I wouldn't hold my breath for delivery of any accessories. I have a radio on order with HRO. I emailed Lab599 support to ask when I might expect

The connectors and handset are spoken for. Thanks for the response! Hopefully I'll be able to pick up a TX-599 before Fall. 73 - Dave, N4ELM

Anticipating getting a TX-599, I ordered sets of connectors and a H250 handset to build my own cables and handset for the TX-599. Due to the increased delay in TX-599 shipment, I cancelled the order

No it does not. -- John Byerly mailto:mtnlion@...

Quick question: does the TX-500 have any provisions for calibrating the internal TCXO to a known-accurate frequency such as a time station or GPSDO? I could not find anything in the manual. 73, Robert

I have one on pre-order, too. But the last I've heard from Pileupdx was on December 13th :( 73 Robert DC1RDB

Using a larger capacitor should not be a problem, you are just extending the low frequency corner. Using a much smaller capacitor would not be a good idea, assuming they calculated the value needed

I use the Kenwood TS-930 as my rig definition and it works much faster than TS-990. I have made several cables. I did use the capacitor as I have tons of new parts and wanted to make sure the TX audio

Question:? have you made a cable for digi modes yet?? the Lab 599 website has some diagrams for making your own cables and it shows a 10uf cap inline w/ the audio in side.? did you do this?? if

OOPS "WHEN it will be available", not 'what'. -- -- Glen - WB4KTF, Austin, TX USA

Hello to the group, I am wondering if anyone knows what the LAB599 Battery Pack for the TX-500 might become available for my rig? Glen - WB4KTF, Austin, TX USA

I got an email stating that the?pre-order release date has been changed once more to March 1, 2021. Their website has been updated accordingly. Following the important part from their email: "Lab599

Bravo, Sir!!!

Hello everyone! I spoke to the guys at Lab599 today. They are going to address the 60 meter TX issue in a firmware update. John - N7ROJ Lab599 USA Service usa.service@... wrote:

I did a quick internet search and found the Amateur and Amateur-satellite Service Spectrum, Revised January 2020, by the Administrative Council, International Amateur Radio Union, Newington, CT (see

I've been corresponding with Lab599 about this and they have based the 60 meter coverage on the IARU region 2 allocation which is incorrect for the USA.? Even after showing them documents with the

Ok, now mine works in that range.? Really wothless, only able to tx on channel 3.? Hopefully there will be a new firmware update to allow full operation.

Alex, OK it works there...looks like the TX-500 will only transmit between 5.35150 and 5.36650, which is only the center channel here in the US. 73, Henry - K4TMC [image: image.png]

Hello Henry, what about if you try 5.35700? I suppose 60 m on the TX-500 is limited to the frequency range for IARU region 1. And the QRG you dialed are outside this range. I suppose this can be fixed

Axel, I dialed in 5.346.50 and 5.403.50, USB, with dummy load connected and get no response when engaging PTT. 73, Henry - K4TMC