¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: TX-FIL1 and TX-FIL 2?
Trevor, I knew it had to somthing simple I was missing. I was stuck in the IC-7300 mindset of menu & submenu on my main rig to get to the TBW settings. Also having not used the rig in more than year,
By Carterbraxton · #4052 ·
Re: TX-FIL1 and TX-FIL 2?
Hi Doug - In the menu you can set different parameters for 4 separate RX filters and 2 separate TX filters. Additionally, you can select which RX filter you want to use when receiving, and which TX
By Trevor Larson - N6TJL - 3163412 · #4051 ·
Re: TX-FIL1 and TX-FIL 2?
Probably switch filter while TXing?
By Andrey Denisyuk · #4050 ·
TX-FIL1 and TX-FIL 2?
I recently updated firmware from V1.10.10 to the current V1.20.03 with no problems. In some ways it is like getting a new rig; as I haven¡¯t used the TX-500 in over a year and with new firmware
By Carterbraxton · #4049 ·
Re: CAT control with Split problem
*Update:* I guess I'm a lone wolf (hi)! It's been almost a year and Lab599 never responded, even after I asked about it a second time. Obviously, there is no priority for this, which does not surprise
By Norm - KC1BMD · #4048 ·
Re: Tripod Mount Suggestions
These are available at Five Below and other stores
By Bob Bennett · #4047 ·
Tripod Mount Suggestions
Hello Everyone, I have been trying out different solutions for holding the display upright or on a slightly less angle from the legs the 599 tx500 provides.? I came up with a cellphone tripod mount
By Greg Cheng - KC3SMW · #4046 ·
Re: TX-500 Battery pogo pins
By Andrey Denisyuk · #4045 ·
Re: TX-500 Battery pogo pins
Just wondering if you ever figured this out. I want to DIY a 4S pack, maybe a 4S 2P pack, and use the pins to supply power instead of having to wire to the input port on the radio. I can't find
By Mike K2MRP · #4044 ·
Re: CW-500 Opinions
David, I have ordered from Desert Wireless it takes a little longer to receive the order it¡¯s a repeatable company. Ammed Ismail KN6STX
By Ammed Ismail · #4043 ·
Re: CW-500 Opinions
overpriced, but handy once you acquire a bp-500 thumbs up on the bama key, which cost $20 less
By kg4zqz · #4042 ·
Re: CW-500 Opinions
HRO only carries the CW-500 direct connect key. That could work for me unless I used the battery with legs to angle both for easier viewing. For me, a 1-ft 3.5mm cable is no big deal to carry. -- 73,
By Norm - KC1BMD · #4041 ·
Re: CW-500 Opinions
Thanks Norm. ?I saw that option on the Dessert Wireless site. ?I think I'll wait until HRO Milwaukee has them in stock again so I can try them out with their TX-500 that they have on display.
By David Holmgren K9AT "Ruffers" · #4040 ·
Re: CW-500 Opinions
It's less wires, which just wins in my book. I don't have the strong attachment to some other keys that some folks do. Is it nice Yes. is that life-changing no
By jbrandii · #4039 ·
Re: CW-500 Opinions
There is another version of the Lab599 key, the CW-500 *U:* Universal Iambic Paddle Key CW-500U - Lab599 (
Re: CW-500 Opinions
I also have the?BaMaKey TP-III. Glued a washer to my clipboard and away I go. The sensitivity and operation of the key is very good. Jim W3APC Sent from AT&T Yahoo Mail for iPhone
By Jim · #4037 ·
Re: CW-500 Opinions
Thanks Nick. ?I too have the rare BP500 so you answered my question if the key would sit too high with the battery attached. 73 K9AT
By David Holmgren K9AT "Ruffers" · #4036 ·
Re: CW-500 Opinions
Sorry. I forgot to update my call on this signature Nick Smith KT3S 5035803604
By Nick Smith NT3S · #4035 ·
Re: CW-500 Opinions
Mine sits on the shelf of unused equipment I don't have the battery and would need to lay the radio flat to use the key Marc
By AH6K - Marc · #4034 ·
Re: CW-500 Opinions
I love mine. Especially with the battery on the back to elevate it slightly above working surface. Nick Smith KJ7NWK 5035803604
By Nick Smith NT3S · #4033 ·