开云体育

The answer is quite simple. Ohms Law ))

You raise a good question Ron. ?I think you are right that as long as the voltage that the panel produces is under 50V the wattage rating doesn't matter. ?If I'm wrong someone speak up. David

Hi David, I have just read the thread that transpired since our initial exchange. I think the others have answered your question much better than I could. That having been said, it brings another

Sorry you're right. ?I missed that.

?

Thanks Philip. ?So you can charge the BP500 with the DC barrel connector connected to the BP500. ?Can you also charge the BP500 with the DC connector attached to the TX-500?

I own the BP-500. You can charge it while connected to the tx-500. I have charged it and it works. I have not tried a solar powered charger. I have not yet tried operating the radio with the bp500

Thanks Ron. ?I found the "Project Farm" video that you referenced in the LONG list of his videos. ?Wow what a comprehensive battery review. ?The winners look like the Sony or the LG. ?Here's the

OK thanks. ?Do you own a BP500 and has this worked for you?

Dovetailing off of what Tim said the TX-500 already comes with an inline 3A "T" style fuse on the positive red wire of the power cable. David K9AT

You don't need to detach bp. Connect 9-15V to trx, or 13-50v to bp. Don't connect both at the same time, ok? ))

That’s not the question David asked. The question which is still not answered even in the document you just sent. This is the question: Don't tell me the BP500 would have to be unscrewed from the

To be fair they do have a picture below the text: I get that you cannot have both the TX-500 and the BP500 receiving power at the same time. ?But looking at the top blue square with the blue check

Connect either or. Don't connect both simultaneously.

Believe me I always read the directions before beginning a project, to a fault. ?If you don't believe me, ask my wife. ?I downloaded the BP500 manual which I encourage everyone to do if they

v1.20.02. (2023.11.30) - Fixed beacon mode disabling when VOX is activated. - Fixed incorrect frequency setup in some conditions when switching from MEM to VFO. - General fixes and improvements. Have

I don't. But I always read the docs first and then ask ppl if I don't understand something

Андрей Денисюк, do you surf the many groups.io ham radio discussion boards and tell people to read the manuals whenever they ask questions about equipment? 73, Randy

Why just not to read the manual?