开云体育

Nope, it’s something I still have to do. I will keep you posted, it might take some time though…

Pier, Have you tried to see if the new early September 2023 FW release (v1.18.08) fixes this issue? 73 -- Greg VA7BC Vancouver, Canada CN89

I just experienced a similar issue as HB9EAJ. Watch the attached video. Using firmware 1.17.13 73, Pier, HB3XEY

if this new firmware helps block the irritating 20M noise generated by iPhones, i will be very happy (happens with nearly all my rigs)

Hi all, I have an irritating noise source which clicks at roughly 1s intervals. The previous NB reduced it slightly but the latest update has cured it completely. just my 2p worth… 73 Andy M0DEL

The Flrig side of things seems to work now as intended which is a great workaround but standalone apps are still struggling so I wouldn’t call it a fix yet. It’s halfway there. One of my other

Just my opinion: The first item gives a clue about what changed but with no detail, it's almost useless information. The second item, lacking any detail at all, is totally useless. Lab599 should get a

Now that they have fixed it in the firmware, looking forward to a fix in the memory channels as well. Seems odd that I can't save a memory channel as digital and it automatically reverts to USB.

Hey Randy and the gang; My BP-500 was sent from UAE on the 28th, and was in yesterday's mail. Picked it this a.m. as I wasn't here to sign for it. Hooked to the radio and charging at the moment. TWO

I found that Digirig CAT control was squirrely in FT8 on my NUC until I uninstalled its driver, then freshly installed the driver from the Digirig website. Chuck w8mqw

Re: Update v1.18.08 * It now seems to stay in DIG mode on freq as well as band changes, at least when using Flrig that has TX-500 in its supported radios list. Have only tested briefly. * Standalone

Today I activated two SOTA summits with the new firmware, all fine. I can't really test the NB, since I don't have an adequate noise source. In the past, I used it with heavy QRN that somehow reduced

I see no change in NB action on noise I tried

Always interested to work out what the "General Fixes and improvements" are, and the new algorithm for NB. So good to see this continuous improvement and development though.

Jacob, I have modified a Windcamp ARK-705 Shield frame, made to fit an Icom IC-705, to hold a TX500 and PA500. I did not make any changes to the TX500 or PA500 to make it fit. It is not a perfect fit,

You'd still need to set up an antenna whip in a backpack, but this is how I run my TX-500 field portable using a Hill People Gear Kit Bag: https://youtu.be/YNtaKQlq5xc?si=qFhqZZ8zS7wqfgBa

Changes: * New NB (noise blanker) filter algorithm * General fixes and improvements I just updated but didn't test the new NB algorithm yet. Have fun and 73, Stephan

I've given this quite a lot of thought and came up with the idea of assembling cables for power and antenna as an adhesive lined shrink wrapped "umbilical cord" which can be attached over the shoulder

Hello everybody, Im sure some of you know of armoloq radio frames, if not, theyre pretty awesome. Problem is, the owner doesnt have a system thatll work for the tx500. My idea would be to operate

THANK YOU SIR!? I have always used the TX500 with a raspberry pi on digital and recently switched to another linux computer.? As soon as I read volume control it hit me, and that is exactly what it