开云体育

I know there is a seperate connection for the dynamic mic but what about audio levels and audio quality. ?That was my question.

The instructions have a detailed introduction. 发送自我的盖乐世 -------- 原始信息 -------- 发件人： "Ian Taylor via groups.io" <iant61@...> 日期: 2023/4/9

Anybody got any experience using the dynamic version of the heil bm-17 with the tx-500. Most people seem to have the IC version but i wanted to be able to use the headset with my yaesu radio as well

FWIW, my experience is that it's very simple and quick. When I thought I was having a problem with the keyer (turns out it was OK) after one update, I reverted back and forth from new to previous

I agree being able to operate below 1w is desirable. I was curious why it wouldn't have been that way out the box. Still very happy with the radio and the original firmware. I've been afraid to

Norm, I'll send Roman a message asap.

I'm hoping to avoid spending more and adding extra stuff to carry and wire up.. Think it would be great if it can just be done with the RF power control in the rig.

https://qrpguys.com/qrpguys-10-20-30db-switched-attenuator

This would be a nice feature but I'd like it because at 10% the TX-500 puts out closer to 2W than 1W. When using the PA500 amp (dyi599) I'd like to be able to reduce the power input to 1W or less. It

Hi all. I am wondering if it would be possible to make a change to the RF power adjustment in a future hardware update. It would be fantastic if power could be turned down even lower. At the moment

Add me to the list of those who have run FT8 on a TX-500 for hours without a problem. (By the way, I’ve tried that with a Xiegu X6100 without success — despite its other positive aspects, that

Hi Jim, Thanks for sharing your experience. Its good to I can go with the TX-500 and not worry about heat too much. I have a Digirig interface. I would just need to jumper it for the 3v3 and get or

I am doing almost exactly the scenario you described with the TX 500. Except the beach part. Works very well. I've done FT8 in particular but other digital modes as well for hours, and as another

That’s great to hear guys. I’m thinking of a field day, solar powered, data modes, QRP station. I’m also fortunate to live near a beach and I thought the TX-500 would be good for that type of

I've also run FT8 on the TX-500 for hours, outdoors in a warm climate. Never had a noticible heat issue

I can't compare the two rigs because I don't have a KX2 (I want one though) but I've run plenty of data modes at the full 10 watts, as well as a pile at 5w. Never had an issue. The radio will get

How does the TX-500 compare in the area of thermal performance compared to a KX2? (Or other rig you may have experience with) I had a KX2 at one time but I didn’t do any data modes with it. My

Yes I found it all works but the ability to write the memory to VFO is now lost which I liked and used a lot. EDIT: I rolled back to 1.15.09 without a problem

And me too please. Ian

Add me for another request to modify the CAT to respond to DIG queries.