开云体育

Thanks everyone for the replies. (I posted in a few groups so you may not have
seen any discussion.)

I asked the seller for more information on the eBay item and after getting his
reply, I ordered one.

Donald KX8K



On Sat, 06 Aug 2022 20:54:30 -0400, "Donald Hellen" <donhellen@...>
wrote:

I think I got a hit:



Look at the 2nd picture down, which is from the connector to connector side. The
third picture is where the wires go into the pin from the back, which would be
inside a radio if it were installed in one. That side is all round holes for the
wires, no D shapes.

I think the part where the one connector chassis socket has a ridge to catch the
clip on the connector on the end of the power cord from the supply is under the
item in all pictures. I'm not sure it matters. I can wrap it with tape to keep
it held together.

About $8 with shipping. I'm not in any hurry, fortunately, as it will take about
a week to get here. Maybe longer.

Does it look good before I buy it? There's another one but it costs more and
it's in the UK, not where I live (USA).

The second pic in the ebay listing is attached.


Donald KX8K


----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP

----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP