73 Linux Via IC 705 with Toughbook CF 19
|
In the past, I have not had any issues loading BAP or 73 Linux. I can not get Pat to change VFO etc. }, ? "listen": [], ? "hamlib_rigs": { ? ? "my-rig": { ? ? ? "address": "", ? ? ? "network": "TCP" #PTT COM1 RTS -DTR #PTT /dev/ttyUSB0 RTS #Uncomment line below for PTT with CAT through FLRIG #PTT RIG 4 localhost:12345 #PTT /dev/ttyUSB0 RTS -DTR #Uncomment line below for PTT with CAT through FLRIG The FLrig Config > client > KMLRPS shows Not sure where to go from here 73 Flrig has Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink:?va7dgp@... Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232 ? ? ? ? ? ? ? ? ? ? |
|
I did remove the # PTT RIG 4 localhost:12345 Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink:?va7dgp@... Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232 ? ? ? ? ? ? ? ? ? ? |
|
Radio Apps: Kissatch Active Direwolf Active Digital Apps: Flrig Active Pat Active The Gui showing refused in the black terminal. 73 Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink:?va7dgp@... Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232 ? ? ? ? ? ? ? ? ? ? On Wed, Jul 17, 2024 at 5:54?AM km4ack via <jason.oleham=[email protected]> wrote:
|
|
So much for attempting to use Linux for Winlink Wednesday on Pat Winlink. 2024/07/17 06:28:12 Unable to get frequency from rig my-rig: dial tcp : connect: connection refused. 2024/07/17 06:28:12 Starting HTTP service (http://127.0.0.1:8080)... 2024/07/17 09:03:57 QSY failed: unable to get rig frequency: dial tcp : connect: connection refused 2024/07/17 09:03:58 QSY failed: unable to get rig frequency: dial tcp : connect: connection refused 2024/07/17 09:04:07 Connecting to VA7DEP-10 (ax25+linux)... 2024/07/17 09:04:52 Unable to establish connection to remote: Dial timeout Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink:?va7dgp@... Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232 ? ? ? ? ? ? ? ? ? ? On Wed, Jul 17, 2024 at 6:38?AM Don Poaps via <va7dgp=[email protected]> wrote:
|
|
On Wed, Jul 17, 2024 at 11:20 AM, Mike K6GTE wrote:
Just my 2 cents but port 4532 usually indicates that the program is trying to use rigctld and not flrig. True but in a basic install, Pat Menu uses rigctl piped to FLRIG for rig control so 4532 is correct in this instance.
?
Don, I had something weird happen today that's similar to your situation and another user has reported something similar as well. I upgraded to Pat 0.16 on a known good system and lost rig control. Thinking it was a Pat issue, I downgraded back to 0.15.1. Still not working. Turns out that FLRIG had lost comms with the radio. Reset everything and I was back in business. Can you confirm that FLRIG still has control over the radio?
?
--
73, de KM4ACK
|
|
|
|
Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink:?va7dgp@... Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232 ? ? ? ? ? ? ? ? ? ? On Wed, Jul 17, 2024 at 9:24?AM km4ack via <jason.oleham=[email protected]> wrote:
|
Don Poaps
km4ack