开云体育

> > Good evening Bruce, > > wow, thanks for the screenshots, it shows the program port settings and > audio levels that is great. Even at KX3 screen the audio level is helpful, > I will try higher

I am running 3.0.3 and I am using Flrig and an 891. it has been working fine for me. the only thing I see is flrig seem slow on showing SWR and power when transmitting but I think that was with the

Guys, can you give us a like to open a conversation with "Mark"? Thanks so much, Lynn? KB3FN

Shah good evening I've taken some photos with my phone of the KX3, PX3 Pi and the applications running on the Pi over VNC from my MAC mini. (Attached) You can see the activity levels enjoyed here in

Shah -- good afternoon Ok this evening I'll take some wsjt-x shots from my Pi screen. I have heard hundreds of stations on FT8 over the last weekend and the screen of my Pi looks at least as good as

That's a great looking setup Bill! Ed and Mark have both pushed me in the right direction - going to ask Mark to build me one of his setups (Pi+TNC+screen), and I'll pair with a 7900 as well.? Will

Good morning Bruce, The Sabrent is connected correctly since WSJT-X works and I was able to see some signal a few thousand miles away using WSPRnet map. Yes, the antenna is probably the culprit since

I have a GPS dongle that I use with my pi4. When I first starting using it I had zero issues. Conky displayed maidenhead, etc. recently it quite acquiring sat’s. I thought that I had messed

I have built one using Mark's PiGate RMS software with a Raspberry Pi 3, a TNC-Pi, and a Yaesu FT-8900.? I had gotten the TNC-Pi when they were available for an APRS demo using an Official Raspberry

Thanks

Hey Tim, Yes, everything is included in the build to run an APRS setup with the signalink. In addition to the GPS, the main components are direwolf and either YAAC or Xastir for the front end GUI

Grant, can you send me info once you’ve done all the work? ? Actually, I have a TNC-X, 2m Mobile, Ft-100D and a PiHat, and want to build a portable gateway that works 2m packet/NVIS HF local and

Thanks Ed. ?Mark just wrote and also recommended the 7900. ?Mind if I start up a conversation with you offline about what the capabilities are and what your setup is?

I have built Mark's PiGate RMS Gateway and it works. I used an FT-7900.? The setup is currently offline because the state has used the ARES group to rebuild the network and we have a bunch of

My closest gateway for WinLink is 17 miles away. ?If that goes down, the next is over-the-horizon. ?In all of Jacksonville, the largest city in the US by size, there are exactly three gateways. We

Good morning I want to set up a pi in my truck that will do aprs capable of doing tracking and messaging. Will the pi build and GPS be all I need to set this up. The radio in my truck is not aprs

Both of the links provided are working at this end. 73, dave/W6TUX

Thank You David! I am sure having fun with this pi 4. Learning how to operate with command line has been interesting but fun also. [email protected]> wrote: -- Bryan

Shah -- good afternoon I'm not next to my rig -- so I'll take some photos next time I'm in the shack. However from memory: 1) Your Sabrent sounds to be connected correctly -- assuming of course you

Good morning, Thanks for the detailed response. The connection goes like this, I have connected the KX3 -> Phones and MiC to Sabrent -> Mic and Speakers respectively with two stereo 3.5mm audio