开云体育

Larrie, Try using hotspot tools to disable the hotspot and see if your WiFi returns to normal. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack )

I’d backup what you have and this should get you square running headless and changing Wi-Fi. I had issues doing this on the may release though of rasbian.

I decided to format the sd and start over. ?This time I left the keyboard/mouse unplugged during the install and everything seems to work! Now to start setting up each program. 73 Ryan

I've just purchased a new router and want to set it my Pi up to use it via VNC as i don't have a monitor to plug into the pi. ?I can connect to the pi via VNC by using the hot spot connection

Hello everyone, I just purchased a IC-7300 and decided to setup a pi-4 to run digital modes on it. ?After reading several websites, I decided to downloaded KM4ACK pi-build v3 and it looks awesome!

Joel,? Thank you for the links. More often then not, "guys" talk about a product and don't provide a link.? Thank you. I have a Flirc case I have used. It is a lot like the Geekworm. I have seen the

Steve, Apologies if you’re aware of these cases already: https://www.amazon.com/Argon-Raspberry-Heatsink-Supports-Accessible/dp/B07WMG27T7

OK, I thought I found the perfect case for my Pi.? For FD..? For wsjt-x.. The Case: Geekworm Case P173 - https://www.amazon.com/Geekworm-Raspberry-Compatible-Aluminum-Only-Black/dp/B07ZVJDRF3

Thanks I was having same problem!

I have one of these to tune the tuner without transmitting a large signal.? Would be nice here also.

Good News!! If you have a GPS connected to your setup, this can be fixed by modifying the GPSD config file.? I have a screenshot of mine below.? It is located at /etc/default/gpsd.? You probably

I would doubt it. Those resolutions are usually found and used in TV Monitors for Media viewing. People don't usually use those modes in PC monitors for things like BaP Ham Shacks. It's a pretty

Could this be the problem? https://www.tomshardware.com/news/raspberry-pi-4-wi-fi-not-working -- 73 de N5RKE

I have waited a couple of minutes perhaps, I did not really monitor that. ?I did do another re-install from Raspian OS to BaP, and this time no wifii issues. ?In this case, I did the work in a room

Problem solved! The issue was the gpsd software and the gps. ?Removing the GPS did not help. ?But, removing the gpsd program fixed the issue. ?Apparently, the gpsd program and the icom-7100, even

This project works ‘nice’ on the Pi, might be worth an add to this project set of tools. https://rigexpert.com/antscope2-for-rasberry-pi-raspbian/

Getting this message on startup of Direwolf: "ERROR can't open device /dev/ttyUSB0 for channel 0 PTT control. Device or resource busy. Pat is active according to Conkey. Could that have my USB port to

Hi I have a somewhat situation like this. I have not tried those commands but do have issue with boot up sometimes connecting to wifi or not, all the time not after a BAP update. I find that if the

If you reboot prior to installing BaP, do you have issues?

Running Build a Pi, I had it all installed but after the reboot, I lost wifii. ?The system indicates I have no wifii hardware. ?Rebooting again does not help. I had this happen to another Pi 4