开云体育

I believe I have found the root cause my piardopc issue.?After looking through Jason's shell scripts for starting the piardopc modem I was able to manually start it in a terminal window and capture

Is it possible to set up beacons for the listening modes (ax25, ARDOP, VARAFM, VARAHF)? ?If I want to beacon through a digi would I use the same format of for the "destination": "digi/callsign" like

Not unless you use BAP's install script, you need to at least change USBAUTO to 'false' and add your USB device to DEVICES. Kevin -- KD9EFV -- EM78dh

Does the gpsd config file get amended the same as with Buster? START_DAEMON=”true” USBAUTO=”true” DEVICES=”/dev/ttyACM0″ GPSD_OPTIONS=”-n”

I'll probably tune loop to 30 m. Years ago my SCS-PTC tnc pulled in from my Dipole N1ZZZ/M and SV1UY when I used UIView. Getting the Xiegu G 90 to PTT using Yaac via port 8000 to use Messaging

Thank you!

its a poor idea of allotment 14.105 is old packet new vara-ac and now also HF APRS sheesh! additionally there is no more information 300 baud is normal for HF so just set dire wolf to 300b and dial on

sudo apt install python3-gps This will install gpsd, gpsd-clients too as dependencies. Kevin -- KD9EFV -- EM78dh

I see Flrig PTT on the radio. If this was UZ7HO it has the ability to PTT. Dierwolf I don't have a clue. APRS on 20m (14MHz) – VK7HSE Ramblings <https://vk7hse.org/aprs-on-20m-14mhz/> Is there a

What is the command for installing gps on bullseye? THank you, Pat

The Pi Zero 2 W is essentially a RPi 3b + with half the RAM, no Ethernet connection, and fewer USB ports. The Pi Zero 2 W is a quad-core board compared to the original Pi Zero W's single core.

fresh install of Build a pi on a compute module 4 when I try to run BPQ config Generator i get an error??/home/pi/linbpq/piBPQConfigGen: No such file or directory but the file is in that directory

To get vara on pi check this https://github.com/WheezyE/Winelink As for other issues, it sounds one off - just personally I have flashed a few devices with no issues as of recent with this script to

Interesting program it’s not installed with this scrip so you need to install it like you would elsewhere. appears to have a full help for install https://www.whitemesa.net/garim/garim.html. as for

Bullsey uses python3-gps Buster may have had python-gps or python2-gps deprecated. Kevin -- KD9EFV -- EM78dh

Thank you gents for responding, reading the T&C for winlink it seems they want dedicated hardware and goals to keep the gateway operating 24/7/365. I understand that they want a reliable

On this BAP build I didnt install gps, gps tools and conky to try something different because I am trying to get my gps working, and I was unable to with the gps tools.? I tried to install gpsd gpsd

On one of my my pi4's I have a software tnc ardop status that I click on before I use gARIM that let's me choose pauvcontrol and ardopc. Which software do I use for gARIM? Also will BAP allow me to

When the RPi Zero 2 W came out, I immediately changed to it and it works MUCH better that the original zero. I have no problem running Fldigi or WSJT-X as it has a 1uad core processor that runs pretty

After testing BAP 2.10.0 on earlier release of Pi OS 64bit PAT(v0.13.1), ARDOP, and VARA-HF were working as expected.? I decided to do a fresh build. I am using a Pi 4b.? For the build I used a