开云体育

its a poor idea of allotment 14.105 is old packet new vara-ac and now also HF APRS sheesh! additionally there is no more information 300 baud is normal for HF so just set dire wolf to 300b and dial on

sudo apt install python3-gps This will install gpsd, gpsd-clients too as dependencies. Kevin -- KD9EFV -- EM78dh

I see Flrig PTT on the radio. If this was UZ7HO it has the ability to PTT. Dierwolf I don't have a clue. APRS on 20m (14MHz) – VK7HSE Ramblings <https://vk7hse.org/aprs-on-20m-14mhz/> Is there a

What is the command for installing gps on bullseye? THank you, Pat

The Pi Zero 2 W is essentially a RPi 3b + with half the RAM, no Ethernet connection, and fewer USB ports. The Pi Zero 2 W is a quad-core board compared to the original Pi Zero W's single core.

fresh install of Build a pi on a compute module 4 when I try to run BPQ config Generator i get an error??/home/pi/linbpq/piBPQConfigGen: No such file or directory but the file is in that directory

To get vara on pi check this https://github.com/WheezyE/Winelink As for other issues, it sounds one off - just personally I have flashed a few devices with no issues as of recent with this script to

Interesting program it’s not installed with this scrip so you need to install it like you would elsewhere. appears to have a full help for install https://www.whitemesa.net/garim/garim.html. as for

Bullsey uses python3-gps Buster may have had python-gps or python2-gps deprecated. Kevin -- KD9EFV -- EM78dh

Thank you gents for responding, reading the T&C for winlink it seems they want dedicated hardware and goals to keep the gateway operating 24/7/365. I understand that they want a reliable

On this BAP build I didnt install gps, gps tools and conky to try something different because I am trying to get my gps working, and I was unable to with the gps tools.? I tried to install gpsd gpsd

On one of my my pi4's I have a software tnc ardop status that I click on before I use gARIM that let's me choose pauvcontrol and ardopc. Which software do I use for gARIM? Also will BAP allow me to

When the RPi Zero 2 W came out, I immediately changed to it and it works MUCH better that the original zero. I have no problem running Fldigi or WSJT-X as it has a 1uad core processor that runs pretty

After testing BAP 2.10.0 on earlier release of Pi OS 64bit PAT(v0.13.1), ARDOP, and VARA-HF were working as expected.? I decided to do a fresh build. I am using a Pi 4b.? For the build I used a

That did it! I neglected the ./ before update! Now how do I get the update tool in the Hamradio/BAP drop-down menu? Rich

Wow...I'm outta ideas...back in Jason's court now....wish I could have helped. Jerry [email protected]> wrote:

Let's forget the menu shortcut for a minute. Something isn't adding up. In the last screenshot you posted, the update script is clearly in the directory. Run this command and screenshot the output

I got it working. It turned out that when I switch the conky-size to "conky-7inch" that was causing the issue. I thought this might work since the display I am using is 7-inch. When I set it back to

Unfortunately not. When trying to run update from the ~/pi-build I get: bash: update: command not found. Rich

I am guessing if you *cd ~/pi-build* then run *./update* the update process runs OK? [email protected]> wrote: