开云体育

James, I have two videos that cover the hotspot setup and use https://youtu.be/7kB2L-dQVr8 https://youtu.be/WqyPgj3cDKE -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

I have flrig controlling my KX2 using the serial cable supplied with the radio. All functions work correctly- vfo, power etc. Everything is fine until I try to turn off the TX. Once the button is

James When you say you are not getting the Pi showing up, do you mean a new SSID is not available? You will not be able to connect to 10.10.10.10 using VNC until you connect your device to the Pi

I cannot get my hotspot to work.? I have everything updated.? Both when I force the hotspot and when I unplug the power to my router, I get the IP address of 10.10.10.10 on the Pi screen (plugged

Also see htop I like it because it shows the CPU usage of the 4 processors and RAM in a graphic display.

I had run BAP and included CHIRP to update. I don't need CHIRP, but noticed the next time I BAP (to add something). I "needed" to update CHIRP, again... I copied this: (if it helps): Checking

Jut ran one of the 2gb Pi4's, and same thing. No joy in updating CHIRP. -- 73 de N5RKE

Just ran BAP, rebooted, and CHIRP still shows that it needs updating. I have 3 systems, just did one, but I can fire up the others if needed. The one that I just tried is a 4gb Pi4, the other 2 are

I have tried unsuccessfully on two different systems to duplicate the issue. Both of them are updating Chirp as expected. Can you try again and see if you get the same results please. -- 73, de

Sorry I deleted too much. https://www.amazon.com/dp/B07BF8Z3HS/ -- 73 de KC0WBP

Sorry wrong email Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Friday, July 24, 2020 12:51:17 PM To: [email protected] <[email protected]> Subject: Re:

Sorry you have a golf on the funds untill the hold is released I can not ship the tunner Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Friday, July 24, 2020

Hey Ron, that is a lot of questions. I’ve noted in my research that hams like the Sabrent as it works separate from the computer or pi. It should not be transmitting any sounds from the computer.

I don't believe I have pulse audio installed.? Would it provide any performance advantage or just increased flexibility and connectivity between aps?

I run the mic unchecked under the playback tab and checked under the recording tab. Can't give you a specific reason. This was what worked for me when I swapped to the Sabrent sound card. Do you have

Strange. I just checked the URL Jeremy and received the same page error. I clicked the link yesterday and amazon item was displayed. Its a magnetic roof mount with GPS antenna and circuitry built into

It also looks like the same thing is now happening to HAMLIB. -- 73 de N5RKE

Thanks for the report guys. I'll see if I can figure out what's changed. https://github.com/km4ack/pi-build/issues/107 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Same problem here...keeps the old version, no matter how many times I tried. Finally manually updated, with no problems. Jerry - LU/K4OAM

Thanks, Neil! That did the trick. 73 de Alan K6ZY