开云体育

added UDP port 11123 to my router under the raspi ip address listed for wireless. still can't get it to bring up a GPS on conky. just says "NO GPS". when i run cgps, no data entered into the fields...

Both options will disable the on-board Wifi. The Hotspot will use the dongle if it is available, as to hotspot auto-starting if there isn't a local wifi network, I haven't tested, but it does work

Hello all, My raspberry Pi is creating so much RFI that I need to switch it off to traffic... That bugs me and I am 90% sure that the culprit is the USB bus. As you all seem to be getting on well with

Hi Kevin, The one thing is,I want to disable internal wlan adapter, the 2nd, I want to use my usb wlan dongle also with Jason’s automatic switching to hotspot, if there is no wlan available Von

Agreed, I can program but I haven’t used Linux enough to build something like BAP. Julian K0JSF

I'm pounding my head against the wall here. I have a pi4 8gb, a digirig 1.6, and a tx-500 with the latest firmware 1.12.08. I have flashed a new image of bullseye 11 on the pi. Updated the pi. Ran the

Jason - I followed your instructions and that fixed my ARDOP problem. I use a CM108/119 based soundcard interface that uses the GPIO-3 pin for PTT.? Direwolf 1.6 does not support CM108/3.? It is

Very good to hear Julian =) I too use Linux OS computers at home and in the field =) I just wish I knew more about programming to help out =) [email protected]> wrote: *73's Pat N5VMO*

Can’t get Pat win link to ptt the radio on usb ? Will ptt the radio on data usb ? I am using a cat cable to my yaseu 991a flrig works great wsjtx and ja8call work perfect also ? Not sure what I’m

I did use Jason’s BAP script to get the basis of my installation done on top of Debian Bullseye on an old iview Maximus ii I had laying around. Kind of finicky at first, somethings never did

It would make an interesting COMMUNITY effort, I'm reluctant to bully Jason into supporting an additional platform. Just my opinion, Ken, N2VIP

Let Jason get things taken care of with the Build - a - Pi first and if he feels compelled to write an multi-platform-APP / Program =) If you have programming abilities please help in the effort in

I have a Pi that I built about 2-3 years ago using your utility. If I rerun your latest code from Github will it install all the updates and retain all my settings for the various applications? For

I think we need to encourage Jason KM4ACK to create a Build-A-Linux for the x86 systems (preferably starting on Debian based). I will start off the encouragement. You can do it Jason!!!!!!!! We all

I flashed a new card and tried on pre bullseye version of pi os. I can’t get it to work over that nor hotspot. I don’t have a vpn running. Saw something in the group chat about that port possibly

Yes, hdmi_force_hotplug=1 has been uncommented all along. The lag I speak of is specific to Chromium.... Thanks for the suggestion...

This is probably an elementary problem, but I can't tackle it without having to revert back to Windows. This is using BaP with Bullseye 32-bit.? I don't remember pre-Bullseye having this much

Have you tried enabling hot_plug in config.txt? I have not seen lagging issues with mine that are headless, but I did enable hot_plug and set resolution in raspi-config. N0LOZ

I have corrected my Raspberry Pi "lagging Chromium" and the "Conky sometimes not on right side of screen"? (as it is configured for) issues...? a $10 per Pi hardware investment.? Scroll down?to

Create /etc/modprobe.d/brcm-blacklist.conf with the following content: blacklist brcmfmac blacklist brcmutil Reboot, and WiFi should be disabled. You may find errors in the system log depending on