开云体育

Assuming you are running the latest Pat Winlink (0.12.1) and you are running Pi OS Bullseye, run the following commands: *cd ~/patmenu2* *git checkout master* *git pull* -- 73, de KM4ACK YouTube (

I don't mean to be a hassle, but I've run into this issue today when running on a new pi build. Is there a proper fix for this currently? Cheers

Hi Jules, I'm glad that you've found the instructions useful! I haven't got a 705 (yet) so maybe someone else could give you an advice. Pat and ardop should be easy tasks if you utilize flrig for CAT

it's normal for them to be listed under multiple categories. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |

See issue 380 - https://github.com/km4ack/pi-build/issues/380 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack )

I ran the pi-build script in the directory. It confirmed that flrig and fldigi were not installed.? I got it to run again.? Lots of log scrolling up, seemed like hamlib was instqalling every Ham

Should all of the ham programs be listed under ham tools and accessories? Is that normal? Or is everything doubled up? I’m new to pi life.

Check out NoMachine software (nomachine.com). It does audio transport. Available for all platforms. I control Rpi4 on Ipad 2 for example. -- KT0TT

Daf, this was a great help.? Wasn't installing js8call, only WSJTX at this point but had previous problems on Buster.? Did a fresh flash of 32 bit Bullseye 11.2 from the RP site and built that first

Not sure if I missed something in the install. Is CQRLog part of the BAP Version 3.2.2? Cannot find it anywhere. Thanks, Larry KO4OPE

I too have everything working when using pat and ardop. I am having an issue when using GARIM though. I have it set up and it connects to ardop no issues, but when I tell garim to beacon, it fails to

Thanks Curt -- Scott K1SMK

See hot audio message. it's a Xiegu G 90 Later Don va7dgp

I thought Alsamixer adjusted audio. F6 etc. I'll have to find info on how to change it. After all those issues my PI 4 works like a charm. PI 3A+. I haven't been able to connect to a Winlink Gateway

That dialog box is a little misleading. You have to read the bold text at the top of the box to know the state. Currently, the dropdown always indicates true. I hope to resolve that in an upcoming

I use PulseAudio to adjust the incoming levels. The annoying thing is that you have to adjust each time you open JS8Call. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Which radio are you trying to configure with FLRIG? Screenshots of the FLRIG setting screen would also be helpful. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Are you running a 64bit version of Bullseye? Did you see my attachments on the error I am receiving? Randy VE3YRG

That will be great, but just wanted to comment that Gridtracker is working with no issue on my fresh install of bullseye and build a pi. I did not have to make any changes at all-it just started right

It did not install.