开云体育

Hi I tried the update this afternoon (local time) before reading this post and it still didn't work, so I tried stepping backwards I re-flashed the sdcare from the same file and then downloaded the

Chris, Let's start by making sure you can run the update script manually. Try running *bash ~/pi-build/update* and see if it will start the update script. -- 73, de KM4ACK YouTube (

Following the latest YouTube video, Build A Pi Update, I updated from 3.0.0 to 3.0.2 using git pull. The Build-A-Pi command was missing in the Preferences list. I tried updating using the longer

It would be a home run if you get VARA running on the pi! -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |

Did you install pulse audio? You could also try alsamixer. Which sound card are you using? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

I don’t seem to be getting any input audio when I am running js8call and wsjtx or FLDigi. I’ve adjusted the volume control all the way up for input device (my external soundcard) but I get no

Novaspirit tech is working on an x86 environment installer for Raspbian Desktop which runs Wine 5.9.? He's just released a Beta of it.? I'll be watching it closely and testing next chance I get

Dave, I built a new image on a pi 3 overnight. FLDIGI installed ok. Can you try using the build a pi update script to install and see if that works please. -- 73, de KM4ACK YouTube (

I had the same thing happen when I plugged in the gps strait into the pi and nothing would happen. if i used a usb ext. cable it worked fine. I found out that my pi case was metal and holding rfi from

Thanks. I suspected it was something along those lines but wasn't sure and appreciate the clarification.

I run a yagi in my living room. I can no longer have antennas on the roof. I also run ladder line j pole for my Raspberry pi (Aprs) and cheap HT. 73 Don va7dgp grant.d.greenwell@...> wrote:

If anyone else needs help with the 7300, the document can be found in my FAQ ( https://tiny.cc/km4ack-faq ) -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

OUTSTANDING!! Glad you confirmed it is working. I got the test message :-) If you have the ability, you might try HF/ARDOP to overcome the line of sight limits of 2M. -- 73, de KM4ACK YouTube (

where is the app note referenced in the note? Bo W4GHV

Some apps indicate "needs update" and some don't even though updates may be available. If an app was installed from the repository, it will be updated even if you don't place a check by the app. This

When I run build a pi update, the individual apps either display installed or needs update. Does the needs update feature work for all of the individual apps? The reason I ask is when I ran it

Happy to report that it's an antenna height issue! ?I went to the site of the gateway, transmitted at 5W, and it worked flawlessly. ?Backed it up 5 miles, then 10, and kept increasing power.

it does not fix this access to princton.edu is blocked here so it times out, a fall back to sourceforge would fix it. fldigi is the only package of that series that wont install - i have deleted the

As of version 3.0.2, BAP will check for updates to the BAP script. Details in tomorrows video :-) The version number isn't on the splash screen but is on the second screen presented when running the

Try running *bash ~/pi-build/conky/setconky * set you your call, choose large for your size, and either Celsius or Fahrenheit. This will for a new config file for conky and hopefully pick up the