开云体育

The build went well, without any major hick-ups, but yes there is always something, like forgetting to plug in something or whatever. But yes it is up and running. The built details is as follow, The

I have been using this screen from Sunfounder. It is intended for use with a Raspberry Pi. It powers from 12vdc and supplies a USB 5vdc connection to the Pi solving the problem of how to power the Pi

that tells me that the pi isn't seeing the radio. you should get something like Fred posted. Try rebooting and run the command again before starting anything else. You might also try swapping to a

well using ssh to get in; then using sudo raspi-config -> advanced options -> set screen resolution -> choose the last option -> "finish and reboot"? .... worked! must have done this on the other pi

Fred, thanks! That info will come in handy once I get connected. Those other settings would have been my next question :-) 73, Tom

That is a new one on me.? I wonder if it is something in the conkyrc file. If this is a new install, may want to run conky-prefs and reapply a template Thanks, Terry K4HNT ---- On Wed, 08 Sep 2021

Its giving me an error but im not able to copy and paste into the browser. "Integer parameter out of range for operation" Thanks, Trevor KJ7MLK [email protected]> wrote:

I dont know much about Rpi4s yet so not sure where to find the version. Could you advise. It should be the newest update. I just newly installed it. Trevor KJ7MLK

Thanks for the reply, Jason. I ran the command you suggested and the response was: '/dev/serial/by-id/': No such file or directory. There is a dev directory off the root but it does not contain a

Tom, Here are the settings in FLRIG for my TS-2000: [image: image.png] I am also using the SignaLink. The update field /dev/serial/by-id/usb-FITDI_FT232R_USB_UART_AQ00S4VP-if00-port0 is selected. I

I’ve been reluctant to try this and use dummy HDMI plugs that simulinstead. But with the Pi4 I’d like to get rid of those due to needed adapters to the mini-HDMI jacks. Despite asking numerous

Hi, I‘m using now BAP since 3 month, first a raspi 4B 2 without a case and 32GB ssd. Here I used mostly js8call, xastir with direwolf and wsjtx. The pi ran stable 24/7 and also the mentioned progs

First, make sure nothing else like WSJTX is trying to control the rig by closing those applications. Now with the radio powered up and connected to the pi, open a terminal and run *ls -l

I notice the same thing on my Pi 3 test box. Left to it's own devices, the swap will fill up over time. This is one reason I have upgraded almost all of them to Pi 4s. If you leave them running all

Try using the GUI Bluetooth tool to connect to the Pi first before running the rfcomm connect tool. Click on the Bluetooth icon in the top right corner of the Pi desktop. -- 73, de KM4ACK YouTube (

Which version of BAP are you running? This video may help https://youtu.be/YIIC-iT6H-s You can also try starting it manually and see what errors it produces. From the terminal run: *conky* -- 73, de

Aha, I think I am almost there. The *hcitool scan* finds my Garmin and gives me the MAC address. When I input *sudo rfcomm connect /dev/rfcomm0 (MAC ADDR HERE)* the Garmin flashes Input Password 1234.

My conky won't show on my BAP screen. I have a RPi4B. I have reinstalled it but it still doesn't show on screen. Any help is appreciated. Trevor KJ7MLK

Thank you.... Trevor KJ7MLK

You can run them on the same Pi. I use OP25 to listen to trunked AP25 public service comms and GQRX as a general SDR receiving program. 73 de AD4XJ