开云体育

Yes. Build a Pi updates does the following: sudo apt-get -y update sudo apt-get -y upgrade sudo apt -y full-upgrade -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

In pat menu, click on Manage Pat Winlink->Set ARDOP PTT. Set to "true" and then click Set PTT.

Mine work 100% on my pi4 8GB Greetings from the Namib Pieter Jacobs De v51pj 73

Does BAP update the Raspian operating system as well as the selected BAP options?

Your phone's GPS will work even if you have no cell service.

There's plenty of apps where you can download offline maps..you can even do it with Google maps. [email protected]> wrote:

I tried this modification and I see the title "Sunspots:" below the SFI and AI entires. However, there is no number reported. I tried to find the file sunspots.txt but it does not exist in any of the

Just wanted to let you know that conky doesn't work on a RPi4 8GB. Tried reloading, tried your gps fix and neither worked.....HELP!!!! Trevor KJ7MLK You can reach me on 440.400 Mhz or at 9712914209

Using FLRIG - it works fine with FLDIGI When I initiate an ARDOP connection through Pat, the frequency was correctly changed on the radio but PTT was never activated on the radio is never energized.

Here is what is displayed: Conky still is blurred until refreshed on boot, version is 3.0.8 but there isn't an Update selection in Build-a Pi menu. This is after running the current update. See

pi@raspberrypi:~ $ cat ~/patmenu2/config #Config file for Pat Menu #20200429 KM4ACK MYCALLSIGN=V51PJ-10 MAP=world RIGCONTROL=yes ARDOP="/home/pi/ardop/./piardopc 8515 plughw:2,0 plughw:2,0"

Thank you, I will check it out. Marty kd8bj

Thanks Jason. I'll give it a go and post my results once I get it to work. @ Brian and Les, thanks for your replies. I am aware of my phone's GPS capability to work without cell service. But I would

In a recent release of BAP, the update tool was moved in the menu. Look under ham radio->build a pi. The current installed release of BAP is stated at the top of the dialog box when you run the update

Ran into something odd over the last couple of days. Had hamlib 4.2 installed and working correctly with an Icom 705. Upgraded the radio firmware from 1.24 to 1.26 and upgraded hamlib from 4.2 to 4.3.

Thank you all for the info and the links. I've looked into these during my research, and it is very good that they are now mentioned and linked here for others as well.? If you have any experience

I think this is the video you are talking about. https://www.youtube.com/watch?v=rkmQxvT8BpQ&t=868s I'm on Android and I'm using the GPSd Forwarder.? It's really simple to use once you get your Pi

I updated my old version of Build-A-Pi and noticed that I do not have the Update selection to my Build-A-Pi menu. Tried to reload Build-A-Pi but it states directory already exist. Also, it would be

HI Can someone post the link to the video to connect the cell phone to use for GPS? Marty kd8bj

The screenshot for pat menu setting is unreadable. Run this command and copy/paste the results here please: *cat ~/patmenu2/config * Which version of rigctl do you have installed? Run: *rigctl