开云体育

Thanks, Jason! That works. Now I just have to find out why it's ignoring Gpredict. Joe KB6WIJ

I **really appreciate everyone's help here. Looks like there is/was a couple of us IC-705 (7300ish) guys with similar questions at the same time. I wanted to report that I have now **successfully**

Hi All Many ways to feed the pi. To get rid of that dreaded lightning bolt and lower power warning (and associated poor performance) I feed the one or two Pi’s that seem to do this, with an

Matt hope you find the fault. Rf entering usb port/s or psu can cause issues - irratic I had an ussue with a signalink that just freeze up. Rerouted the cables today and hope that sorted out. Only

Greetings Pieter. The problem is probably unique to my shack.? I do not believe it is RFI, but am chasing that down today to rule it out.? In every program, different results occur.? Either I get

Jason, Testing Solar Muf Script. I don't seem to have /usr/bin/convert. Is it part of your rollout or do I use apt install?

Hi all Just got a new pi and setting it up - my old ones are too old! I am installing it bit by bit and am currently adding the autohotspot. The setup is now in Downloads and I am running the

You also need to verify that the baud rate is set in the rigctl statement and that it matches what you have set on the radio. I don't have my 817 in front of me but I believe it is called the CAT RATE

Hi Jason, Ran the command, & this is the results: "cat: /usr/share/applications/hamrs.desktop: No such file or directory" 73, de VA7RYL

Here is the response: [image: image.png]

Great! This tells us that the script is working and that the ruby gems are installed :-) Now let's look at another file. Run this command: *cat /run/user/$UID/gridtext.info * which should show you

You have have clicked the "check all and continue" button at the bottom of the window. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Hey Bob, Can run this command and post the results please: *cat /usr/share/applications/hamrs.desktop* -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack

Lots of different power supplies.? Ones like the official Raspberry Pi and USB power cubes of different manufacturers and amperages.? This obviously only works with power supplies that have a USB

I believe you have a couple places that need inspection, mainly it looks like there is no rig definition.? ? From an Ardop speed perspective, Ardop is like an old dial up internet modem.? The

Here is my config.json.? ?Also my quick stats are ARDOP Speed = 500, I have set this to 2000 with same results, ARDOP PTT is True, Listen Modes is ardop, Rig Control is yes, Pat Port is 5000. {

Morning Vic. I've ordered a pi-zero and the banana pi isn't available until mid September here in France -- so I'll try the pi zero first. 73 Bruce G4ABX

Jim Can you post a copy of your config? Be sure to blank out your winlink password which is near the top of the file. Terry

Hi, as I had problems with gps after updating BAP 3.0.7 to 3.0.8 (no satellites are found) I just build up a new system with Bap 3.0.8 to check, if the gps problems are still there with a new

JayvSheepdog, is it possible to solder a power pole connector to the bottom of the MakerFocus DockerPi hat barrel connector without using the barrel jack. Thanks in advance Echodelta10 KE8EZA