开云体育

I haven't installed Dave's image but I read that he left out a couple of components needed for pat menu. Try running *sudo apt-get install jq* *sudo apt-get install yad * and see if that helps. -- 73,

I have. If I turn it off and back in again it recovers the normal WiFi signal for a while then reverts back to the double arrows. Occasionally it will drop all together to the arrows with the red

I ran into a weird GPS issue during field day. The GPS was working fine. I had a lock and everything was good on the pi. Next I plugged in an external USB thumb drive (something I normally don't do in

Try using the BAP update script to update Ham Clock. Even though it doesn't show it needs an update, put a check mark beside hamclock. This will force it to update the app. It will also give you the

For my pi's that use the power board ( https://amzn.to/2YFi5cm ) , I use this case https://amzn.to/2YHVP1B and leave the top plate off. If anyone else has found a case that actually fits, I would love

In following the Build-A-Pi setup, I notice that the basic case does not work with the power hat. What other cases has this group selected when using the power hat? 73s, Ed, KD9FRQ

I'm just reading about this issue Michael. sorry if this seems simplistic but have you clicked the double arrows and a dialogue should appear that says "Turn on wifi"?

Hi all, Any ideas on how to get the Kenwood TH-D74 sending and receiving email messages with Pat? It has a KISS TNC built-in... VJ

Fresh Flash of Raspbian OS, set localization options, NO Build a pi....let it sit for about 30 minutes...Double Arrows are back! Obviously has nothing to do with Build a Pi. Either it is something

Opening Hamclock (ESPHamclock), it notifies that v. 2.47 is available, and asks to download it. This update fails with an overwrite error. I know why this is happening, since the BAP puts the program

That's my issue. USP GPS is flashing but not being picked up 73 Don wrote:

Thank you for the suggestions. I have gone to a back up sd card first to see if something has been corrupted in the card. I had to use Jason’s nuclear option on the other card to get the flmsg to

Has anyone used the Pat menu on Hampi W3DJS raspberry pi image?? I try to run it, the hourglass spins but the pat menu doesnt come up.

Is there a way to send Winlink Forms via the Pat Client , Blessings to all de 9Z4DZ, Stephenson

My issues are identical! I did check, and i ran both systemctl is-active gpsd systemctl is-active chronyd, and they say active. When I run gpsmon -n? it shows no satalites. Yet I do have a steady

Couple suggestions for you: First, delete the duplicate entries in wpa_supplicant.conf. This can confuse the Pi. Second, try changing the line update_config=0 so your file looks like below. I’m

Joe, Thank you very much for your helpful reply. That did the trick. I have now added your suggestion to my "to-do" list of building a pi. New and still learning!! Thanks. 73, Paul (NC9W) Sent:

And Nope...back to the double arrows. No ideas now.

Lots of research seems to be a sampling of this issue going back several generations in various forms. My hypothesis...something on the network is fighting the pi for the address. I have set a static

Paul, Did you change the resolution in in raspi config? Sound like you need to run the following: sudo raspi-config select advanced options select A5 Resolution select your desired screen resolution (