开云体育

Marty is correct. I had that error too and had to run the command he listed. Tim KB2MFS

Hi Christ You have run into the known problem from a recent change, which BAP will catch up to in a future update. I think you can move forward by this command: sudo apt install libudev.dev which

Hi Just tried to update Build-a-pi, but got this error message Tried it two, and got the error both times :-( Regards Christ Den s?n. 18. jul. 2021 kl. 01.52 skrev Tim and Janet <kb2mfs@...>:

I know that feeling. Thanks for the help Kevin. Tim KB2MFS

Hmmm... I'm out of ideas, but it's been a long day, and the hands and brain aren't talking to each other...

Should have included that....sorry. Yes tried both and still no connection. Tim

Did you try either of those?

Yes both are listed along with many more. Tim

Do you have ttyS0 or ttyAMA0 listed in your dropdown?

Here is the result: pi@KB2MFS:~ $ ls -la /dev/ttyUSB* crw-rw---- 1 root dialout 188, 0 Jul 17 18:27 /dev/ttyUSB0 crw-rw---- 1 root dialout 188, 1 Jul 17 18:27 /dev/ttyUSB1 After the groups command:

What does the command: ls -la /dev/ttyUSB* [enter] show? Does it show root dialout? If so, run the command: groups [enter] if the list doesn't have dialout in it, run the command: sudo usermod -aG

Kevin, This is the result after entering the information: pi@KB2MFS:~ $ dmesg | grep tty [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0

Thanks Kevin. I will check later today once I get home and post the results. Tim KB2MFS

On the Pi,? with one of the USB cables inserted, at a terminal or command line enter: dmesg | grep tty [enter] and report the results here, please.

Good morning. I have just added an Icom 7610 to the shack and trying to get the RPI4 and FLRig to work.? I am not a linux guru but have updated all software and the BAP shows them current.? FLRig

Hello, as a new version of build a pi is now in beta status, I have following question: can I replace an existing build a pi by the new version and then update the existing system with the new build a

Has anyone solved the pat Winlink PTT via flrig. I have flrig configured for my FT-dx10 (selected hamlib version 4.2? FT-dx101D Stable). It works on WSJT-X, fldigi, js8call selecting FLRIG FLRIG. I

The following files have been uploaded to the Files area of the [email protected] group. * /Custom-Conky-Files/.conkyrc_left ( /g/KM4ACK-Pi/files/Custom-Conky-Files/.conkyrc_left )

Upload works fine now, thanks Jason.

Never make any statements of problems until you do a reboot. Once rebooted, Build-a-Pi shows that Hamrs is installed!! Embarrassed Les WD5BYQ