开云体育

I'm using BAP's current build on a clean image that I built yesterday.? Hardware: SignaLink, on a Pi 4B.? I've edited the Pat configuration as per Jason's videos and when I try to connect to a

Hi all I had noticed on the Raspberry pi site an iso download for i386. I have a fairly large stable of older i386 32GB laptops. One of my newer ones is an HP Stream 11 inch I had setup with xubuntu

Not sure how Dave has things configured for hampi. PatMenu is designed to run with Build a Pi out of the box without moving things around. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip

Thanks for the reply, Dean. To answer your questions, yes I am able to fully control the rig via FLRig. Tune, PTT, etc. Native GPS on the 705 works and is being pulled properly for Conky. The only

from FLRig, are you able to tune? when you press PTT does it key the radio?? If yes then you just need to set up your different digital protocols to interface with flrig and flrig will control the

I am new to the Raspberry Pi and was looking to implement a portable digital setup. The Build-a-Pi looks like the perfect solution to getting what I wanted on the system, so I watched the video and

Hello again. I'm working my way through the "Raspberry Pi Build For Ham Radio" Parts 1, 2, and 3 plus the "Pi 4 Build Notes Revised 20200225" referenced in Part 1 of the videos above. For the most

Jason, On ur mobi connect script i found the file do i save it on my pi and where do i go from there

Hi all, I'm hoping someone knows the answer. I have raspberry pi 4 and I downloaded the ham pi 1.2 image. There were some files not in right places but I think I fixed all of that. I'm turning on

Are you using vox? I had problem where I could hear other station calling back but it would never connect. I had to change vox delay to 0.1 I believe and that solved it.

K9ew solution fixed my problem of? running out of screen with the window resizing. A gold star on your report card, Ed for solving my problem. 73 John Limanowski? N9DNB

Hi guys, Just installed BAP on a Pi4B alongside my IC-705. I am able to get everything to work (Conky, GPS, FLRig, etc) EXCEPT anything that requires a soundcard...FLDigi or WJST-X, etc. The only

I use my iphone with VNC almost exclusively for all FT-8 and most digital modes. Never had any monitor attached to any of my Pi’s acutally, they’re all headless. Did you try placing the mouse

Hi Guys, I am having problems scrolling the open window of ft-8? and any other application when using a Ipad. The application window opens up filling the screen and? the 2 finger scroll control does

In this case they are identical

Update: ?Its Working! I thought that the only thing different was that the Pi 4 also had USB3 ports and that they may be interacting with the USB2 port that the GPS was plugged in. I have a Pi

You're assuming the USB device naming conventions are the same on both RPi. You need to check to make sure that is the case. Also, not sure this matters but I noticed a difference in how you reference

Thanks for you patience Sorry the link I meant to post was the one you just offered me https://youtu.be/YIIC-iT6H-s your script correctly configured /etc/default/gpsd ?as you described in that video.

You can access Pat's inbox from any browser on any device. Make sure your phone/tablet is on the same network as the pi and then navigate to pi-ip-addr:port So if my Pi's ip address is 10.10.10.199

https://github.com/km4ack/pi-build Flash the card with the latest buster and then use the directions on the page linked above. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (